Hovatek Forum MOBILE Android Need Help! Totally Bricked Infinix X551 Need firmware and Stock rom
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Need Help! Totally Bricked Infinix X551 Need firmware and Stock rom

Need Help! Totally Bricked Infinix X551 Need firmware and Stock rom

Pages (3): Previous 1 2 3 Next
BazlEugene
BazlEugene
BazlEugene
Enthusiastic Member
13
24-06-2015, 08:26 AM
#11



(23-06-2015, 04:57 PM)hovatek
(23-06-2015, 12:51 PM)BazlEugene No. The MTK drivers are not recognising the device (with the usb malfunctioned notification showing when I connect). It is still dead after the three days of charging.

What should I do?

that means flashing might've been interrupted the first time.
use the methods @ https://www.hovatek.com/forum/thread-808.html

I have been following this same guide... and I have been charging for 4 days now... I still continue charging?
hovatek
hovatek
hovatek
Administrator
49,570
24-06-2015, 12:16 PM
#12
(24-06-2015, 08:26 AM)BazlEugene I have been following this same guide... and I have been charging for 4 days now... I still continue charging?

apparently , yes. keep re-installing the drivers and trying to flash from time to time.
it'll eventually come alive

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
BazlEugene
BazlEugene
BazlEugene
Enthusiastic Member
13
25-06-2015, 08:19 AM
#13
(24-06-2015, 12:16 PM)hovatek
(24-06-2015, 08:26 AM)BazlEugene I have been following this same guide... and I have been charging for 4 days now... I still continue charging?

apparently , yes. keep re-installing the drivers and trying to flash from time to time.
it'll eventually come alive

will the phone come alive while charging from the wall charger, or will it do so when I connect to the computer for flashing?


On day 5 now
hovatek
hovatek
hovatek
Administrator
49,570
25-06-2015, 11:03 AM
#14
(25-06-2015, 08:19 AM)BazlEugene will the phone come alive while charging from the wall charger, or will it do so when I connect to the computer for flashing?


On day 5 now

you'll vary from time to time with wall charger being the most used.
what does the PC show when you try flashing again? and have you tried using other PCs and USB cords?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
BazlEugene
BazlEugene
BazlEugene
Enthusiastic Member
13
25-06-2015, 11:25 AM
#15



(25-06-2015, 11:03 AM)hovatek
(25-06-2015, 08:19 AM)BazlEugene will the phone come alive while charging from the wall charger, or will it do so when I connect to the computer for flashing?


On day 5 now

you'll vary from time to time with wall charger being the most used.
what does the PC show when you try flashing again? and have you tried using other PCs and USB cords?

I've tried using 3 different PCs and 3 different cables to no avail. The SP Flash tool status bar remains at 0% and the prompt on the USB connection still reads "Searching" when I try to flash.
hovatek
hovatek
hovatek
Administrator
49,570
25-06-2015, 02:16 PM
#16
(25-06-2015, 11:25 AM)BazlEugene I've tried using 3 different PCs and 3 different cables to no avail.  The SP Flash tool status bar remains at 0% and the prompt on the USB connection still reads "Searching" when I try to flash.

do you still get the USB not recognized prompt?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
BazlEugene
BazlEugene
BazlEugene
Enthusiastic Member
13
25-06-2015, 03:09 PM
#17
(25-06-2015, 02:16 PM)hovatek
(25-06-2015, 11:25 AM)BazlEugene I've tried using 3 different PCs and 3 different cables to no avail.  The SP Flash tool status bar remains at 0% and the prompt on the USB connection still reads "Searching" when I try to flash.

do you still get the USB not recognized prompt?

Yes I get the same "USB not Recognised" prompt on all 3 PC's no matter what USB cable I use
hovatek
hovatek
hovatek
Administrator
49,570
25-06-2015, 04:34 PM
#18
(25-06-2015, 03:09 PM)BazlEugene Yes I get the same "USB not Recognised" prompt on all 3 PC's no matter what USB cable I use

you need to continue with the method @ https://www.hovatek.com/forum/thread-808.html then

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
BazlEugene
BazlEugene
BazlEugene
Enthusiastic Member
13
01-07-2015, 07:58 AM
#19
(25-06-2015, 04:34 PM)hovatek
(25-06-2015, 03:09 PM)BazlEugene Yes I get the same "USB not Recognised" prompt on all 3 PC's no matter what USB cable I use

you need to continue with the method @ https://www.hovatek.com/forum/thread-808.html then

So the phone is back on again... After removing the battery to achieve it. However, SP flash tool gives me an error code about the COM port no being opened... How do I resolve that?

Also I still need to flash the phone since my initial problem was the privacy protection lock... What files do i need to flash from the MTK backup?
hovatek
hovatek
hovatek
Administrator
49,570
01-07-2015, 12:11 PM
#20



(01-07-2015, 07:58 AM)BazlEugene So the phone is back on again... After removing the battery to achieve it. However, SP flash tool gives me an error code about the COM port no being opened... How do I resolve that?

Also I still need to flash the phone since my initial problem was the privacy protection lock... What files do i need to flash from the MTK backup?

for the port issue, try another USB cord , PC port or PC
for the privacy protection lock, follow the guide @ https://www.hovatek.com/forum/thread-1138.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (3): Previous 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram