Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 3 Vote(s) - 4.33 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] How to make an MTK Droid tools backup of an MTK Android phone

#31

guy do u nid tips on how to upload it


Reply
#32
(04-17-2015, 10:50 AM)lilauch042 Wrote: guy do u nid tips on how to upload it

he has sent it. will locate your open thread and grant
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#33
(08-07-2014, 12:31 PM)hovatek Wrote: Note: This procedure is the same for all MTK based Android phones (e.g Tecno, Gionee, Infinix, TLC, Opsson, Innjoo, Lead1 etc )

# See the video tutorial below or @ http://youtu.be/AJLgSD9zHb8





Tools needed

* A working MTK phone
* Download PdaNet
* Download MTK Droid tools
* PC
* USB Cord

Procedure

* Enable USB debugging on the good MTK phone (Settings > Developer > Tick USB Debugging) then connect it to PC. If you don't find Developer under Settings then go to Settings > About > Keep taping Build Number
* Install PdaNet on the PC with the USB debugging enabled working MTK phone still connected (Select Other from the list of devices during installation)
* At the end of PdaNet installation, you should get a "drivers successfully installed" message
* Exit PdaNet in system tray (bottom right corner of PC)
* Launch MTK droid tools as Administrator (right-click > run as Administrator) still with the working MTK phone connected to PC
* MTK droid tools should detect and display the phones details by the left along with a yellow box at the bottom
* Click ROOT at the bottom of MTK and select Yes/OK if prompted on PC and Grant if prompted on phone
* If you get an error saying "Error: file adbd not install" then read https://forum.hovatek.com/thread-1219.html to fix it
* A progress bar should load at the bottom shortly after which the yellow box should become green
* Click on the root,backup,recovery tab at the top
* Click Backup (MTK should keep writing some things by the right hand side during backup) and wait till backup is complete
* If you get a prompt to pack backup, select No.
* Once backup is complete, don't close MTK droid tools
* Go to the MTK droid tools folder > Backups > Folder named after the phone's model e.g Tecno_m3_backup.... and take note of this folder as the 'Backup folder' because we'll be referring to it soon
* Go back to MTK droid tools and click 'To prepare blocks for Flash Tool'
* A window will open, in this window, navigate to the Backup folder (mentioned above) and select the md5 file
* MTK will start copying some items (check the right hand side) so wait till copying is complete
* If you get an error like "Preparation of files for FlashTool is impossible, file isn't found" then remove all scatter files in the backup folder except one and rename this last one to MT65??_Android_scatter ( where "??" represents the number for your phone model e.g MT6572_Android_scatter)
* Once copying is complete, open the Backup folder and you should see a folder named "!Files to flash"
* The !files to flash folder is a selection of files needed to use Sp Flash tool, keep it well
* Both the !files to flash folder and the x_backup folder (which contains the !files to flash folder) are your phone's MTK backup
* If you need an MTK Droid tools backup of usrdata and cache then use MTK Droid Tools version 2.3.0 or copy them from the Clockworkmod backup ( see http://forum.hovatek.com/thread-472.html )

Sir... Am unable to go beyond this pop up (Preparation of files for FlashTool is impossible, file isn't found) and i checked the backup folder for scatter file as it was instructed, but i couldnt find any... Please what is the scatter file look like? and how can i get the scatter file for TECNO G9 or how to edit it?........ 
Reply
#34
(This post was last modified: 06-02-2015, 08:46 PM by hovatek. )
(06-02-2015, 01:26 PM)WhiteDragon Wrote: Preparation of files for FlashTool is impossible, file isn't found) and i checked the backup folder for scatter file as it was instructed, but i couldnt find any... Please what is the scatter file look like? and how can i get the scatter file for TECNO G9 or how to edit it?.......

create a new thread by clicking https://forum.hovatek.com/newthread.php?fid=76 to avoid a mixup
in the new thread, list all the files inside the backup folder (MTK droid tools > backups) to make things faster
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#35
i try backing up my infinix hot note, bt droid tool is nt displaying my fone imformation after following all procedure.
Reply
#36
Wen i inplug d fone nd plug back d pdnet wil prompt nd say htc code erro i tink

D erro is HTC sync erro= -1
Reply
#37
(06-10-2015, 09:40 AM)mboy13 Wrote: Wen i inplug d fone nd plug back d pdnet wil prompt nd say htc code erro i tink

D erro is HTC sync erro= -1

create a new thread so we  can focus on it
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#38
i hav created oo bt havnt gotten any respond since.
Reply
#39
(06-10-2015, 03:49 PM)mboy13 Wrote: i hav created oo bt havnt gotten any respond since.

thats unlikely. whats the link to the thread you created?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#40
ADMIN PLEASE CHECK THE BELOW IMAGE ..........

Attached Files
.png   rootshell.PNG (Size: 27.59 KB / Downloads: 6)
Reply










Users browsing this thread:
1 Guest(s)