Hi, Guest! Login / Register




Thread Rating:
  • 3 Vote(s) - 4.33 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] How to make an MTK Droid tools backup of an MTK Android phone

#71

(12-03-2015, 09:17 AM)Harbudul Wrote: please my mtk is saying filr abdb not installed.what else do i do change the yellow to green?

See https://forum.hovatek.com/thread-7655.html


Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#72
(12-03-2015, 12:31 PM)hovatek Wrote:
(12-03-2015, 09:17 AM)Harbudul Wrote: please my mtk is saying filr abdb not installed.what else do i do change the yellow to green?
yeah thank you later saw the page

See https://forum.hovatek.com/thread-7655.html
Reply
#73
what is can for infnix note 2 x600
Reply
#74
(08-07-2014, 12:31 PM)hovatek Wrote: Note: This procedure is the same for all MTK based Android phones (e.g Tecno, Gionee, Infinix, TLC, Opsson, Innjoo, Lead1 etc )

# See the video tutorial below or @ http://youtu.be/AJLgSD9zHb8





Tools needed

* A working MTK phone
* Download PdaNet
* Download MTK Droid tools @ https://hovatek.com/redirect.php?link=ht...s_253.html . For newer chipsets, download @ https://hovatek.com/redirect.php?link=ht...v253d.html
* PC
* USB Cord
* Enough space. Ensure to have at least 4GB  free (some phones require over 10 GB free so get a 16 GB SD card just to be on a safe side ) on the SD card / phone Storage to avoid the insufficient storage space error)

Note

If you encounter any error in MTK Droid Tools then see a list of MTK Droid tools errors and their solutions @ https://forum.hovatek.com/thread-7655.html

Procedure

* Enable USB debugging on the good MTK phone (Settings > Developer > Tick USB Debugging) then connect it to PC. If you don't find Developer under Settings then go to Settings > About > Keep taping Build Number
* Install PdaNet on the PC with the USB debugging enabled working MTK phone still connected (Select Other from the list of devices during installation)
* At the end of PdaNet installation, you should get a "drivers successfully installed" message
* Exit PdaNet in system tray (bottom right corner of PC)
* Launch MTK droid tools as Administrator (right-click > run as Administrator) still with the working MTK phone connected to PC
* MTK droid tools should detect and display the phones details by the left along with a yellow box at the bottom
* Click ROOT at the bottom of MTK and select Yes/OK if prompted on PC and Grant if prompted on phone
* A progress bar should load at the bottom shortly after which the yellow box should become green
* Click on the root,backup,recovery tab at the top
* Click Backup (MTK should keep writing some things by the right hand side during backup) and wait till backup is complete
* If you get a prompt to pack backup, select No.
* Once backup is complete, don't close MTK droid tools
* Go to the MTK droid tools folder > Backups > Folder named after the phone's model e.g Tecno_m3_backup.... and take note of this folder as the 'Backup folder' because we'll be referring to it soon
* Go back to MTK droid tools and click 'To prepare blocks for Flash Tool'
* A window will open, in this window, navigate to the Backup folder (men
tioned above) and select the md5 file
* MTK will start copying some items (check the right hand side) so wait till copying is complete
* Once copying is complete, open the Backup folder and you should see a folder named "!Files to flash" 
* The !files to flash folder is a selection of files needed to use Sp Flash tool, keep it well
* Both the !files to flash folder and the x_backup folder (which contains the !files to flash folder) are your phone's MTK backup
* If you need an MTK Droid tools backup of usrdata and cache then use MTK Droid Tools version 2.3.0 or do a read back using Sp flash tool (see https://forum.hovatek.com/thread-526.html )
I need permission to download infinix x551 stock rom...... [email protected]
Reply
#75
(08-07-2014, 12:31 PM)hovatek Wrote: Note: This procedure is the same for all MTK based Android phones (e.g Tecno, Gionee, Infinix, TLC, Opsson, Innjoo, Lead1 etc )

# See the video tutorial below or @ http://youtu.be/AJLgSD9zHb8





Tools needed

* A working MTK phone
* Download PdaNet
* Download MTK Droid tools @ https://hovatek.com/redirect.php?link=ht...s_253.html . For newer chipsets, download @ https://hovatek.com/redirect.php?link=ht...v253d.html
* PC
* USB Cord
* Enough space. Ensure to have at least 4GB  free (some phones require over 10 GB free so get a 16 GB SD card just to be on a safe side ) on the SD card / phone Storage to avoid the insufficient storage space error)

Note

If you encounter any error in MTK Droid Tools then see a list of MTK Droid tools errors and their solutions @ https://forum.hovatek.com/thread-7655.html

Procedure

* Enable USB debugging on the good MTK phone (Settings > Developer > Tick USB Debugging) then connect it to PC. If you don't find Developer under Settings then go to Settings > About > Keep taping Build Number
* Install PdaNet on the PC with the USB debugging enabled working MTK phone still connected (Select Other from the list of devices during installation)
* At the end of PdaNet installation, you should get a "drivers successfully installed" message
* Exit PdaNet in system tray (bottom right corner of PC)
* Launch MTK droid tools as Administrator (right-click > run as Administrator) still with the working MTK phone connected to PC
* MTK droid tools should detect and display the phones details by the left along with a yellow box at the bottom
* Click ROOT at the bottom of MTK and select Yes/OK if prompted on PC and Grant if prompted on phone
* A progress bar should load at the bottom shortly after which the yellow box should become green
* Click on the root,backup,recovery tab at the top
* Click Backup (MTK should keep writing some things by the right hand side during backup) and wait till backup is complete
* If you get a prompt to pack backup, select No.
* Once backup is complete, don't close MTK droid tools
* Go to the MTK droid tools folder > Backups > Folder named after the phone's model e.g Tecno_m3_backup.... and take note of this folder as the 'Backup folder' because we'll be referring to it soon
* Go back to MTK droid tools and click 'To prepare blocks for Flash Tool'
* A window will open, in this window, navigate to the Backup folder (mentioned above) and select the md5 file
* MTK will start copying some items (check the right hand side) so wait till copying is complete
* Once copying is complete, open the Backup folder and you should see a folder named "!Files to flash" 
* The !files to flash folder is a selection of files needed to use Sp Flash tool, keep it well
* Both the !files to flash folder and the x_backup folder (which contains the !files to flash folder) are your phone's MTK backup
* If you need an MTK Droid tools backup of usrdata and cache then use MTK Droid Tools version 2.3.0 or do a read back using Sp flash tool (see https://forum.hovatek.com/thread-526.html )









if i don't have another working phone, then what?

Reply
#76
Please i need help on my infinix note 2 after update the camera is poor both front and back camera

Sent from my Infinix-X600 using Hovatek mobile
Reply
#77
(02-15-2016, 10:21 AM)Toscotech Wrote: Please i need help on my infinix note 2 after update the camera is poor both front and back camera

Sent from my Infinix-X600 using Hovatek mobile

create a new thread,
see https://forum.hovatek.com/thread-514.html for how to create a thread
Reply
#78
I have Media Tek-USB-VCOM drivers already installed on my pc, do I also need to download PDANet? Also, link to download working DROID MTK Tool is not working, it's redirecting to another site Adf.Ly, help with a working link. Thanks
Reply
#79
The phone I am trying to flash is as a result of forgotten password. If there is any way I can retrieve/unlock the phone without flashing it , I will appreciate. Thank you
Reply
#80
(03-21-2016, 03:22 PM)nafizzey Wrote: The phone I am trying to flash is as a result of forgotten password. If there is any way I can retrieve/unlock the phone without flashing it , I will appreciate. Thank you

create a new thread
see https://forum.hovatek.com/thread-514.html for how to create a thread
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)