[Tutorial] How to use MTK Droid tools to backup Mediatek firmware
[Tutorial] How to use MTK Droid tools to backup Mediatek firmware
(03-12-2015, 09:17 AM)Harbudul please my mtk is saying filr abdb not installed.what else do i do change the yellow to green?
(03-12-2015, 12:31 PM)hovatek(03-12-2015, 09:17 AM)Harbudul please my mtk is saying filr abdb not installed.what else do i do change the yellow to green?yeah thank you later saw the page
See https://www.hovatek.com/forum/thread-7655.html
(07-08-2014, 12:31 PM)hovatek Note: This procedure is the same for all MTK based Android phones (e.g Tecno, Gionee, Infinix, TLC, Opsson, Innjoo, Lead1 etc )I need permission to download infinix x551 stock rom...... okpalatony24@yahoo.com
# See the video tutorial below or @ http://youtu.be/AJLgSD9zHb8
Tools needed
* A working MTK phone
* Download PdaNet
* Download MTK Droid tools @ http://www.4shared.com/rar/MQ0enk_kba/MT...s_253.html . For newer chipsets, download @ http://www.4shared.com/zip/P4H5Dv8-ce/Mt...v253d.html
* PC
* USB Cord
* Enough space. Ensure to have at least 4GB free (some phones require over 10 GB free so get a 16 GB SD card just to be on a safe side ) on the SD card / phone Storage to avoid the insufficient storage space error)
Note
If you encounter any error in MTK Droid Tools then see a list of MTK Droid tools errors and their solutions @ https://www.hovatek.com/forum/thread-7655.html
Procedure
* Enable USB debugging on the good MTK phone (Settings > Developer > Tick USB Debugging) then connect it to PC. If you don't find Developer under Settings then go to Settings > About > Keep taping Build Number
* Install PdaNet on the PC with the USB debugging enabled working MTK phone still connected (Select Other from the list of devices during installation)
* At the end of PdaNet installation, you should get a "drivers successfully installed" message
* Exit PdaNet in system tray (bottom right corner of PC)
* Launch MTK droid tools as Administrator (right-click > run as Administrator) still with the working MTK phone connected to PC
* MTK droid tools should detect and display the phones details by the left along with a yellow box at the bottom
* Click ROOT at the bottom of MTK and select Yes/OK if prompted on PC and Grant if prompted on phone
* A progress bar should load at the bottom shortly after which the yellow box should become green
* Click on the root,backup,recovery tab at the top
* Click Backup (MTK should keep writing some things by the right hand side during backup) and wait till backup is complete
* If you get a prompt to pack backup, select No.
* Once backup is complete, don't close MTK droid tools
* Go to the MTK droid tools folder > Backups > Folder named after the phone's model e.g Tecno_m3_backup.... and take note of this folder as the 'Backup folder' because we'll be referring to it soon
* Go back to MTK droid tools and click 'To prepare blocks for Flash Tool'
* A window will open, in this window, navigate to the Backup folder (men
tioned above) and select the md5 file
* MTK will start copying some items (check the right hand side) so wait till copying is complete
* Once copying is complete, open the Backup folder and you should see a folder named "!Files to flash"
* The !files to flash folder is a selection of files needed to use Sp Flash tool, keep it well
* Both the !files to flash folder and the x_backup folder (which contains the !files to flash folder) are your phone's MTK backup
* If you need an MTK Droid tools backup of usrdata and cache then use MTK Droid Tools version 2.3.0 or do a read back using Sp flash tool (see https://www.hovatek.com/forum/thread-526.html )
(07-08-2014, 12:31 PM)hovatek Note: This procedure is the same for all MTK based Android phones (e.g Tecno, Gionee, Infinix, TLC, Opsson, Innjoo, Lead1 etc )
# See the video tutorial below or @ http://youtu.be/AJLgSD9zHb8
Tools needed
* A working MTK phone
* Download PdaNet
* Download MTK Droid tools @ http://www.4shared.com/rar/MQ0enk_kba/MT...s_253.html . For newer chipsets, download @ http://www.4shared.com/zip/P4H5Dv8-ce/Mt...v253d.html
* PC
* USB Cord
* Enough space. Ensure to have at least 4GB free (some phones require over 10 GB free so get a 16 GB SD card just to be on a safe side ) on the SD card / phone Storage to avoid the insufficient storage space error)
Note
If you encounter any error in MTK Droid Tools then see a list of MTK Droid tools errors and their solutions @ https://www.hovatek.com/forum/thread-7655.html
Procedure
* Enable USB debugging on the good MTK phone (Settings > Developer > Tick USB Debugging) then connect it to PC. If you don't find Developer under Settings then go to Settings > About > Keep taping Build Number
* Install PdaNet on the PC with the USB debugging enabled working MTK phone still connected (Select Other from the list of devices during installation)
* At the end of PdaNet installation, you should get a "drivers successfully installed" message
* Exit PdaNet in system tray (bottom right corner of PC)
* Launch MTK droid tools as Administrator (right-click > run as Administrator) still with the working MTK phone connected to PC
* MTK droid tools should detect and display the phones details by the left along with a yellow box at the bottom
* Click ROOT at the bottom of MTK and select Yes/OK if prompted on PC and Grant if prompted on phone
* A progress bar should load at the bottom shortly after which the yellow box should become green
* Click on the root,backup,recovery tab at the top
* Click Backup (MTK should keep writing some things by the right hand side during backup) and wait till backup is complete
* If you get a prompt to pack backup, select No.
* Once backup is complete, don't close MTK droid tools
* Go to the MTK droid tools folder > Backups > Folder named after the phone's model e.g Tecno_m3_backup.... and take note of this folder as the 'Backup folder' because we'll be referring to it soon
* Go back to MTK droid tools and click 'To prepare blocks for Flash Tool'
* A window will open, in this window, navigate to the Backup folder (mentioned above) and select the md5 file
* MTK will start copying some items (check the right hand side) so wait till copying is complete
* Once copying is complete, open the Backup folder and you should see a folder named "!Files to flash"
* The !files to flash folder is a selection of files needed to use Sp Flash tool, keep it well
* Both the !files to flash folder and the x_backup folder (which contains the !files to flash folder) are your phone's MTK backup
* If you need an MTK Droid tools backup of usrdata and cache then use MTK Droid Tools version 2.3.0 or do a read back using Sp flash tool (see https://www.hovatek.com/forum/thread-526.html )
(15-02-2016, 10:21 AM)Toscotech Please i need help on my infinix note 2 after update the camera is poor both front and back camera
Sent from my Infinix-X600 using Hovatek mobile
(21-03-2016, 03:22 PM)nafizzey The phone I am trying to flash is as a result of forgotten password. If there is any way I can retrieve/unlock the phone without flashing it , I will appreciate. Thank you
