Hi, Guest! Login / Register




Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Downloads] Flash file for a Bricked Tecno D3

#1

Hello Hovatek,

I am new new user to this forum. I have a Bricked Tecno D3 mobile phone that when you switch it on. It keeps restarting continuously. It restarts when the Tecno logo is displayed. 

The problem started when it did a Hard Reset to restore the phone because of a forgotten password.  

Whenever it try to Hard Reset now it just shows aa Exclamation mark with a small mobile phone image. I am now stuck. I am requesting for the flash file i believe that will make my phone work again.

I hope my request will be granted. Thanking you in advance.

Regards,
Clement.



Reply
#2
Hello Hovatek, I am new new user to this forum. I have a Bricked Tecno D3 mobile phone that when you switch it on. It keeps restarting continuously. It restarts when the Tecno logo is displayed. The problem started when it did a Hard Reset to restore the phone because of a forgotten password. Whenever it try to Hard Reset now it just shows aa Exclamation mark with a small mobile phone image. I am now stuck. I am requesting for the flash file i believe that will make my phone work again. I hope my request will be granted. Thanking you in advance.
Regards, Clement.

My email address is [email protected]
Reply
#3
(07-05-2015, 01:51 PM)Clement Mwashambwa Wrote: Hello Hovatek, I am new new user to this forum. I have a Bricked Tecno D3 mobile phone that when you switch it on. It keeps restarting continuously. It restarts when the Tecno logo is displayed.  The problem started when it did a Hard Reset to restore the phone because of a forgotten password.   Whenever it try to Hard Reset now it just shows aa Exclamation mark with a small mobile phone image. I am now stuck. I am requesting for the flash file i believe that will make my phone work again. I hope my request will be granted. Thanking you in advance.
Regards, Clement.

My email address is [email protected]

granted! download @ https://forum.hovatek.com/thread-311.html and flash using Sp flash tool @ https://forum.hovatek.com/thread-159.html
Reply
#4
Thank you very much for the file. I am downloading the file right now. I will need your advice on the following, when i connect the phone the drivers that were detected and installed in the device manager are: SPRD Android COM Enumerator 1, SPRD Android COM Enumerator 2, SCI General U2S(AT)COM8 and SCI Vendor U2S(AT)COM7. At time will show trying to install UsbcdCacm_6_1d87c6b1_0_0002_00 and UsbcdCacm_6_1d87c6b1_0_0001_00.

Question: Is it okay to proceed with the flash procedure given on the forum?.

Your assistance is highly appreciated.

Regards,
Clement.

My email address is [email protected]
Reply
#5
(07-05-2015, 09:01 PM)Clement Mwashambwa Wrote: Thank you very much for the file. I am downloading the file right now. I will need your advice on the following, when i connect the phone the drivers that were detected and installed in the device manager are: SPRD Android COM Enumerator 1, SPRD Android COM Enumerator 2, SCI General U2S(AT)COM8 and SCI Vendor U2S(AT)COM7. At time will show trying to install UsbcdCacm_6_1d87c6b1_0_0002_00 and UsbcdCacm_6_1d87c6b1_0_0001_00.

Question: Is it okay to proceed with the flash procedure given on the forum?.

Your assistance is highly appreciated.

Regards,
Clement.

My email address is [email protected]

your D3 appears to be spreadtrum based, some appear to be MTK based and some Spreadtrum based. in your case, you'll need a pac file
Reply










Users browsing this thread:
1 Guest(s)