Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] How to port TWRP custom recovery to an MTK Android phone

#41

(09-18-2015, 01:45 AM)ghdfjkgh Wrote: So I successfully installed TWRP on my device using this method but the problem is the touch isn't working, only the power button is working so the TWRP is unusable. Please help, what should I do?

what's the phone model and do the volume buttons work?


Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#42
thanx for seed
Reply
#43
(07-06-2015, 12:23 AM)hovatek Wrote: This guide will explain how to port and flash TWRP custom recovery to your MTK (e.g Tecno, Infinix, Gionee, Innjoo etc) Android phone using Easy Magic TWRP Installer.

Requirement

* Download Easy Magic TWRP Installer (for JellyBean | for Kitkat)
* PC
* USB cord
* MTK Android phone with USB debugging enabled (Settings > Developer)

Procedure

* Launch TWRP setup.exe on the PC and click Next

[Image: port-twrp-to-mtk-1.jpg]

* You should get a prompt confirming that the installation was successful, click OK

[Image: port-twrp-to-mtk-2.jpg]

* Wait till the credits note prompt is done then close it

[Image: port-twrp-to-mtk-3.jpg]

* For "Do you want to start Easy Magic TWRP installer for MTK now", select Yes

[Image: port-twrp-to-mtk-4.jpg]

* For "What do you want to do", tick "Start Easy Magic TWRP installer for Mediatek now" then click OK

[Image: port-twrp-to-mtk-5.jpg]

* Click Yes for Auto-Port

[Image: port-twrp-to-mtk-6.jpg]

* Connect the phone to the PC via USB cord then click OK

[Image: port-twrp-to-mtk-7.jpg]

* Wait for a few seconds

[Image: port-twrp-to-mtk-8.jpg]

* Ensure the phone is connected to the PC via USB cord then click OK

[Image: port-twrp-to-mtk-9.jpg]

* For "Do you have a flipped recovery screen", you may select No if you dont or dont know what this means

[Image: port-twrp-to-mtk-10.jpg]

* The program will display the phone's boot image (secure / insecure), SoC, Screen resolution and Partition information . Just sit back and wait

* You should get a prompt saying "Rebooting to recovery...."

[Image: port-twrp-to-mtk-11.jpg]

* If porting and flashing were successful, you should get a prompt saying Congrats!

[Image: port-twrp-to-mtk-12.jpg]

* The phone should now boot into TWRP recovery 

[Image: port-twrp-to-mtk-13.jpg]
It did not work for my Tecno P5, it says ported recovery image is too large and will cause region overlap.

Sent from my TECNO P5 using Tapatalk
Reply
#44
(10-08-2015, 06:30 PM)ExcellentAndroid Wrote: It did not work for my Tecno P5, it says ported recovery image is too large and will cause region overlap.

Sent from my TECNO P5 using Tapatalk

Yes, it won't. Try CWM or Carliv instead
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#45
* Download Easy Magic TWRP Installer (for JellyBean | for Kitkat) what of easy magic for lollipop? Where can we download it or how we using the same installer?
Reply
#46
(10-11-2015, 05:27 PM)Drockstar Wrote: * Download Easy Magic TWRP Installer (for JellyBean | for Kitkat) what of easy magic for lollipop? Where can we download it or how we using the same installer?

we'll update the article once available
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#47
Kindly assist me with porting Clockworkmod for ITEL IT1501 I NOTE.....THANKS

Sent from my itel it1501 using Hovatek mobile
Reply
#48
I have tecno r7 but flash but it power only blue screen solution
Reply
#49
Flashfile for p5s indeed it
Reply
#50
(10-25-2015, 07:48 PM)loyfork Wrote: I have tecno r7 but flash but it power only blue screen solution

(10-25-2015, 07:49 PM)loyfork Wrote: Flashfile for p5s indeed it

create new threads for these to avoid mixups
see how to create a new thread @ https://forum.hovatek.com/thread-514.html
Reply










Users browsing this thread:
1 Guest(s)