Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] How to port TWRP custom recovery to an MTK Android phone

#51

Boss can this process be used on lollipop device? Gionee m3 mini to be specific...


Reply
#52
Please how can i update my twrp recovery from V2.8.2.0 to V2.8.7.x on my Infinix zero2 X509 mt6592 kitkat.

Thank you.
Reply
#53
(12-05-2015, 08:45 AM)Phoenix619 Wrote: Boss can this process be used on lollipop device? Gionee m3 mini to be specific...

(12-05-2015, 10:02 AM)6ixGunz Wrote: Please how can i update my twrp recovery from V2.8.2.0 to V2.8.7.x on my Infinix zero2 X509 mt6592 kitkat.

Thank you.

Will require manual porting
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#54
(12-05-2015, 01:45 PM)hovatek Wrote:
(12-05-2015, 08:45 AM)Phoenix619 Wrote: Boss can this process be used on lollipop device? Gionee m3 mini to be specific...

(12-05-2015, 10:02 AM)6ixGunz Wrote: Please how can i update my twrp recovery from V2.8.2.0 to V2.8.7.x on my Infinix zero2 X509 mt6592 kitkat.

Thank you.

Will require manual porting

Ok sir please tutorial and the recovery I can use to port.
Thank you.
Reply
#55
(12-05-2015, 01:45 PM)hovatek Wrote: Will require manual porting

Ok, plz how do I go about it?
Reply
#56
(07-06-2015, 12:23 AM)hovatek Wrote: This guide will explain how to port and flash TWRP custom recovery to your MTK (e.g Tecno, Infinix, Gionee, Innjoo etc) Android phone using Easy Magic TWRP Installer.

Requirement

* Download Easy Magic TWRP Installer (for JellyBean | for Kitkat)
* PC
* USB cord
* MTK Android phone with USB debugging enabled (Settings > Developer)

Procedure

* Launch TWRP setup.exe on the PC and click Next

[Image: port-twrp-to-mtk-1.jpg]

* You should get a prompt confirming that the installation was successful, click OK

[Image: port-twrp-to-mtk-2.jpg]

* Wait till the credits note prompt is done then close it

[Image: port-twrp-to-mtk-3.jpg]

* For "Do you want to start Easy Magic TWRP installer for MTK now", select Yes

[Image: port-twrp-to-mtk-4.jpg]

* For "What do you want to do", tick "Start Easy Magic TWRP installer for Mediatek now" then click OK

[Image: port-twrp-to-mtk-5.jpg]

* Click Yes for Auto-Port

[Image: port-twrp-to-mtk-6.jpg]

* Connect the phone to the PC via USB cord then click OK

[Image: port-twrp-to-mtk-7.jpg]

* Wait for a few seconds

[Image: port-twrp-to-mtk-8.jpg]

* Ensure the phone is connected to the PC via USB cord then click OK

[Image: port-twrp-to-mtk-9.jpg]

* For "Do you have a flipped recovery screen", you may select No if you dont or dont know what this means

[Image: port-twrp-to-mtk-10.jpg]

* The program will display the phone's boot image (secure / insecure), SoC, Screen resolution and Partition information . Just sit back and wait

* You should get a prompt saying "Rebooting to recovery...."

[Image: port-twrp-to-mtk-11.jpg]

* If porting and flashing were successful, you should get a prompt saying Congrats!

[Image: port-twrp-to-mtk-12.jpg]

* The phone should now boot into TWRP recovery 

[Image: port-twrp-to-mtk-13.jpg]

I tried this steps and I got an error that sorry cannot pack recovery after selecting res size for gionee p2. Please help
Reply
#57
(12-05-2015, 01:45 PM)hovatek Wrote:
(12-05-2015, 08:45 AM)Phoenix619 Wrote: Boss can this process be used on lollipop device? Gionee m3 mini to be specific...

(12-05-2015, 10:02 AM)6ixGunz Wrote: Please how can i update my twrp recovery from V2.8.2.0 to V2.8.7.x on my Infinix zero2 X509 mt6592 kitkat.

Thank you.

Will require manual porting

How to manually port the TWRP
Reply
#58
(07-06-2015, 12:23 AM)hovatek Wrote: This guide will explain how to port and flash TWRP custom recovery to your MTK (e.g Tecno, Infinix, Gionee, Innjoo etc) Android phone using Easy Magic TWRP Installer.

Requirement

* Download Easy Magic TWRP Installer (for JellyBean | for Kitkat)
* PC
* USB cord
* MTK Android phone with USB debugging enabled (Settings > Developer)

Procedure

* Launch TWRP setup.exe on the PC and click Next

[Image: port-twrp-to-mtk-1.jpg]

* You should get a prompt confirming that the installation was successful, click OK

[Image: port-twrp-to-mtk-2.jpg]

* Wait till the credits note prompt is done then close it

[Image: port-twrp-to-mtk-3.jpg]

* For "Do you want to start Easy Magic TWRP installer for MTK now", select Yes

[Image: port-twrp-to-mtk-4.jpg]

* For "What do you want to do", tick "Start Easy Magic TWRP installer for Mediatek now" then click OK

[Image: port-twrp-to-mtk-5.jpg]

* Click Yes for Auto-Port

[Image: port-twrp-to-mtk-6.jpg]

* Connect the phone to the PC via USB cord then click OK

[Image: port-twrp-to-mtk-7.jpg]

* Wait for a few seconds

[Image: port-twrp-to-mtk-8.jpg]

* Ensure the phone is connected to the PC via USB cord then click OK

[Image: port-twrp-to-mtk-9.jpg]

* For "Do you have a flipped recovery screen", you may select No if you dont or dont know what this means

[Image: port-twrp-to-mtk-10.jpg]

* The program will display the phone's boot image (secure / insecure), SoC, Screen resolution and Partition information . Just sit back and wait

* You should get a prompt saying "Rebooting to recovery...."

[Image: port-twrp-to-mtk-11.jpg]

* If porting and flashing were successful, you should get a prompt saying Congrats!

[Image: port-twrp-to-mtk-12.jpg]

* The phone should now boot into TWRP recovery 

[Image: port-twrp-to-mtk-13.jpg]

not work on lollipop,..something tool or guide for porting twrp for mtk lollipop sir ?
Reply
#59
What of lollipop ?

Sent from my M5 mini using Hovatek mobile
Reply
#60
(04-20-2016, 03:02 PM)lakunle1love Wrote: What of lollipop ?

Sent from my M5 mini using Hovatek mobile

on meizu m2 note bro
Reply










Users browsing this thread:
1 Guest(s)