Hovatek Forum MOBILE Android [Tutorial] How to port TWRP for Mediatek using Easy Magic Installer
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Tutorial] How to port TWRP for Mediatek using Easy Magic Installer

[Tutorial] How to port TWRP for Mediatek using Easy Magic Installer

Pages (12): 1 2 3 4 512 Next
hovatek
hovatek
hovatek
Administrator
49,570
06-07-2015, 12:23 AM
#1



This guide will explain how to port and flash TWRP custom recovery to your MTK (e.g Tecno, Infinix, Gionee, Innjoo etc) Android phone using Easy Magic TWRP Installer.

Update: Use our MTK Auto TWRP porter instead

Requirement
  • Download Easy Magic TWRP Installer (for JellyBean | for Kitkat)
  • PC
  • USB cord
  • MTK Android phone with USB debugging enabled (Settings > Developer)
  • Root access

STeps to port TWRP using Easy Magic Installer

  • Launch TWRP setup.exe on the PC and click Next

    [Image: port-twrp-to-mtk-1.jpg]

  • You should get a prompt confirming that the installation was successful, click OK

    [Image: port-twrp-to-mtk-2.jpg]

  • Wait till the credits note prompt is done then close it

    [Image: port-twrp-to-mtk-3.jpg]

  • For "Do you want to start Easy Magic TWRP installer for MTK now", select Yes

    [Image: port-twrp-to-mtk-4.jpg]

  • For "What do you want to do", tick "Start Easy Magic TWRP installer for Mediatek now" then click OK

    [Image: port-twrp-to-mtk-5.jpg]

  • Click Yes for Auto-Port

    [Image: port-twrp-to-mtk-6.jpg]

  • Connect the phone to the PC via USB cord then click OK

    [Image: port-twrp-to-mtk-7.jpg]

  • Wait for a few seconds

    [Image: port-twrp-to-mtk-8.jpg]

  • Ensure the phone is connected to the PC via USB cord then click OK

    [Image: port-twrp-to-mtk-9.jpg]

  • For "Do you have a flipped recovery screen", you may select No if you dont or dont know what this means

    [Image: port-twrp-to-mtk-10.jpg]

  • The program will display the phone's boot image (secure / insecure), SoC, Screen resolution and Partition information . Just sit back and wait

  • You should get a prompt saying "Rebooting to recovery...."

    [Image: port-twrp-to-mtk-11.jpg]

  • If porting and flashing were successful, you should get a prompt saying Congrats!

    [Image: port-twrp-to-mtk-12.jpg]

  • The phone should now boot into TWRP recovery 

    [Image: port-twrp-to-mtk-13.jpg]

Important Notice
  • This tool is for Mediatek devices only. Trying it on any other chipset would give an error
  • Only old Mediatek chipsets are supported by this tool. for newer Mediatek chipsets, use our Auto TWRP porter
This post was last modified: 09-01-2019, 12:05 PM by X3non.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Kidochukwu
Kidochukwu
Kidochukwu
Experienced Member
88
06-07-2015, 03:09 AM
#2
Thanks Hova...

Pls.. TWRP n CWM... Which would you advise to be used??

Sent from my Infinix-X551 using Hovatek mobile
hovatek
hovatek
hovatek
Administrator
49,570
06-07-2015, 11:17 AM
#3
(06-07-2015, 03:09 AM)Kidochukwu Thanks Hova...  

Pls..  TWRP n CWM...  Which would you advise to be used??

Sent from my Infinix-X551 using Hovatek mobile

TWRP has additional features but they're both great

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
tlord
tlord
tlord
Senior Member
266
07-07-2015, 10:14 AM
#4
can I use cmd backup with this
hovatek
hovatek
hovatek
Administrator
49,570
07-07-2015, 02:42 PM
#5



(07-07-2015, 10:14 AM)tlord can I use cmd backup with this

i dont understand your question

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
tlord
tlord
tlord
Senior Member
266
07-07-2015, 03:03 PM
#6
I have a bricked f5 it only on when I insert USB. mtk droid is writing error like shell not found. what file will I flash with so flash tool. I have the latest spflashtool
hovatek
hovatek
hovatek
Administrator
49,570
07-07-2015, 06:51 PM
#7
(07-07-2015, 03:03 PM)tlord I have a bricked f5 it only on when I insert USB. mtk droid is writing error like shell not found. what file will I flash with so flash tool. I have the latest spflashtool

flash all files

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
tlord
tlord
tlord
Senior Member
266
07-07-2015, 07:07 PM
#8
I can't find cache and user data in !file to flash
Kidochukwu
Kidochukwu
Kidochukwu
Experienced Member
88
08-07-2015, 12:09 AM
#9
(06-07-2015, 11:17 AM)hovatek
(06-07-2015, 03:09 AM)Kidochukwu Thanks Hova...  

Pls..  TWRP n CWM...  Which would you advise to be used??

Sent from my Infinix-X551 using Hovatek mobile

TWRP has additional features but they're both great

OK... So in other words TWRP is preferable... Right??
This post was last modified: 08-07-2015, 12:09 AM by Kidochukwu.
hovatek
hovatek
hovatek
Administrator
49,570
08-07-2015, 10:15 AM
#10



(08-07-2015, 12:09 AM)Kidochukwu OK... So in other words TWRP is preferable...  Right??

thats a matter of choice

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (12): 1 2 3 4 512 Next
Users browsing this thread:
 3 Guest(s)
Users browsing this thread:
 3 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram