Hovatek Forum MOBILE Android [Tutorial] How to port TWRP for Mediatek using Easy Magic Installer
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Tutorial] How to port TWRP for Mediatek using Easy Magic Installer

[Tutorial] How to port TWRP for Mediatek using Easy Magic Installer

Pages (12): Previous 13 4 5 6 712 Next
hovatek
hovatek
hovatek
Administrator
49,570
18-09-2015, 10:56 AM
#41



(18-09-2015, 01:45 AM)ghdfjkgh So I successfully installed TWRP on my device using this method but the problem is the touch isn't working, only the power button is working so the TWRP is unusable. Please help, what should I do?

what's the phone model and do the volume buttons work?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
kalhwii
kalhwii
kalhwii
Enthusiastic Member
5
03-10-2015, 04:59 PM
#42
thanx for seed
ExcellentAndroid
ExcellentAndroid
ExcellentAndroid
Respected Member
124
08-10-2015, 06:30 PM
#43
(06-07-2015, 12:23 AM)hovatek This guide will explain how to port and flash TWRP custom recovery to your MTK (e.g Tecno, Infinix, Gionee, Innjoo etc) Android phone using Easy Magic TWRP Installer.

Requirement

* Download Easy Magic TWRP Installer (for JellyBean | for Kitkat)
* PC
* USB cord
* MTK Android phone with USB debugging enabled (Settings > Developer)

Procedure

* Launch TWRP setup.exe on the PC and click Next

[Image: port-twrp-to-mtk-1.jpg]

* You should get a prompt confirming that the installation was successful, click OK

[Image: port-twrp-to-mtk-2.jpg]

* Wait till the credits note prompt is done then close it

[Image: port-twrp-to-mtk-3.jpg]

* For "Do you want to start Easy Magic TWRP installer for MTK now", select Yes

[Image: port-twrp-to-mtk-4.jpg]

* For "What do you want to do", tick "Start Easy Magic TWRP installer for Mediatek now" then click OK

[Image: port-twrp-to-mtk-5.jpg]

* Click Yes for Auto-Port

[Image: port-twrp-to-mtk-6.jpg]

* Connect the phone to the PC via USB cord then click OK

[Image: port-twrp-to-mtk-7.jpg]

* Wait for a few seconds

[Image: port-twrp-to-mtk-8.jpg]

* Ensure the phone is connected to the PC via USB cord then click OK

[Image: port-twrp-to-mtk-9.jpg]

* For "Do you have a flipped recovery screen", you may select No if you dont or dont know what this means

[Image: port-twrp-to-mtk-10.jpg]

* The program will display the phone's boot image (secure / insecure), SoC, Screen resolution and Partition information . Just sit back and wait

* You should get a prompt saying "Rebooting to recovery...."

[Image: port-twrp-to-mtk-11.jpg]

* If porting and flashing were successful, you should get a prompt saying Congrats!

[Image: port-twrp-to-mtk-12.jpg]

* The phone should now boot into TWRP recovery 

[Image: port-twrp-to-mtk-13.jpg]
It did not work for my Tecno P5, it says ported recovery image is too large and will cause region overlap.

Sent from my TECNO P5 using Tapatalk
hovatek
hovatek
hovatek
Administrator
49,570
09-10-2015, 10:36 AM
#44
(08-10-2015, 06:30 PM)ExcellentAndroid It did not work for my Tecno P5, it says ported recovery image is too large and will cause region overlap.

Sent from my TECNO P5 using Tapatalk

Yes, it won't. Try CWM or Carliv instead

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Drockstar
Drockstar
Drockstar
Senior Member
504
11-10-2015, 05:27 PM
#45



* Download Easy Magic TWRP Installer (for JellyBean | for Kitkat) what of easy magic for lollipop? Where can we download it or how we using the same installer?
hovatek
hovatek
hovatek
Administrator
49,570
11-10-2015, 10:04 PM
#46
(11-10-2015, 05:27 PM)Drockstar * Download Easy Magic TWRP Installer (for JellyBean | for Kitkat) what of easy magic for lollipop? Where can we download it or how we using the same installer?

we'll update the article once available

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
shireka
shireka
shireka
Newbie
1
24-10-2015, 07:17 PM
#47
Kindly assist me with porting Clockworkmod for ITEL IT1501 I NOTE.....THANKS

Sent from my itel it1501 using Hovatek mobile
loyfork
loyfork
loyfork
Newbie
2
25-10-2015, 07:48 PM
#48
I have tecno r7 but flash but it power only blue screen solution
loyfork
loyfork
loyfork
Newbie
2
25-10-2015, 07:49 PM
#49
Flashfile for p5s indeed it
X3non
X3non
X3non
Recognized Contributor
22,062
25-10-2015, 08:30 PM
#50



(25-10-2015, 07:48 PM)loyfork I have tecno r7 but flash but it power only blue screen solution

(25-10-2015, 07:49 PM)loyfork Flashfile for p5s indeed it

create new threads for these to avoid mixups
see how to create a new thread @ https://www.hovatek.com/forum/thread-514.html
Pages (12): Previous 13 4 5 6 712 Next
Users browsing this thread:
 3 Guest(s)
Users browsing this thread:
 3 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram