Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help with tecno H5

#1

Hello I have a tecno H5 but i cant seem to know how to flash. I have its scatter file but I dont know which mode is appropriate to boot in the mode for sp flash tool. When I remove the battery and use the volume down, I reach the factory mode only. So the tool doesn't detect it. Any help? Thanks much for your support.


Reply
#2
(07-06-2015, 02:44 PM)Baptenda Wrote: Hello I have a tecno H5 but i cant seem to know how to flash. I have its scatter file but I dont know which mode is appropriate to boot in the mode for sp flash tool. When I remove the battery and use the volume down, I reach the factory mode only. So the tool doesn't detect it. Any help? Thanks much for your support.

you'll need more than a scatter file. you need a stock backup
1. whats wrong with the phone and how did it start?
2. supply a gmail address
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
I want to check if I can fix the camera issue. I remember when I installed a flashlight app and later the main camera is not working anymore. When I turn on the camera, only the from camera works. Tried to reset no change. So I think the only way to check if the camera can work is to do flash stock. My email address is [email protected] Thanks a million.
Reply
#4
(07-06-2015, 09:21 PM)Baptenda Wrote: I want to check if I can fix the camera issue. I remember when I installed a flashlight app and later the main camera is not working anymore. When I turn on the camera, only the from camera works. Tried to reset no change. So I think the only way to check if the camera can work is to do flash stock. My email address is [email protected] Thanks a million.

granted! download h5 new backup @ https://forum.hovatek.com/thread-311.html and flash system.img (Android) using Sp flash tool @ https://forum.hovatek.com/thread-159.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
Thanks for the permissions. For the flashing process I have a problem though. I tried all methods to make it read by sp flash tool, to no avail. So is there any mode specific for my Tecno H5? I had read somewhere it's necessary to press the volume down when you want to flash a rom to an mtk, but this too failed. Was it because I was flashing a scatter file? Need your help again. Thank you.
Reply
#6
(07-07-2015, 12:57 PM)Baptenda Wrote: Thanks for the permissions. For the flashing process I have a problem though. I tried all methods to make it read by sp flash tool, to no avail. So is there any mode specific for my Tecno H5? I had read somewhere it's necessary to press the volume down when you want to flash a rom to an mtk, but this too failed. Was it because I was flashing a scatter file? Need your help again. Thank you.

list the files in the backup folder you have. I need to know exactly what you're trying to flash first.
BTW, you dont need to hold volume down button. 
ensure you'd installed vcom drivers using https://forum.hovatek.com/thread-440.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#7
(07-07-2015, 03:08 PM)hovatek Wrote:
(07-07-2015, 12:57 PM)Baptenda Wrote: Thanks for the permissions. For the flashing process I have a problem though. I tried all methods to make it read by sp flash tool, to no avail. So is there any mode specific for my Tecno H5? I had read somewhere it's necessary to press the volume down when you want to flash a rom to an mtk, but this too failed. Was it because I was flashing a scatter file? Need your help again. Thank you.

list the files in the backup folder you have. I need to know exactly what you're trying to flash first.
BTW, you dont need to hold volume down button. 
ensure you'd installed vcom drivers using https://forum.hovatek.com/thread-440.html

Hello, I attached a picture showing which files I found inside the zip file. So which file will I flash first then? Thanks
Reply
#8
(07-09-2015, 07:43 PM)Baptenda Wrote: Hello, I attached a picture showing which files I found inside the zip file. So which file will I  flash first then? Thanks

flash all the files in it.
ensure to follow the SP flash tool guide @ https://forum.hovatek.com/thread-159.html and see the video

Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)