[Tutorial] How to use SP Flash tool to backup Mediatek firmware
[Tutorial] How to use SP Flash tool to backup Mediatek firmware
The steps below explain how to use SP Flash tool to backup / readback / dump a Mediatek phone''s firmware
See the video tutorial below or @ http://youtu.be/CrpHIlcc43U(06-01-2015, 07:55 PM)Cornel I don't understand this procedure In the dialogue box, tick Hex. To get
Start address, go back to the second step
above and enter the value under the Scatter
column for the file / partition you with to
extract . Since we're copying Boot.img , the
value under scatter for Bootimg is
0002980000 that will be 0x2980000 .
To get the Length , check under the Size
column for the file / partition you wish to
extract . for Bootimg as shown above, size
is 0000600000 that will be 0x600000
then Click Ok . The trick is to replace all 0s
before the first non-zero digit with 0x
(08-01-2015, 10:36 AM)Cornel In the box, leave Hex ticked. For startdont worry about the color of the box. use the scatter value for FAT for Length (which will be 0xc3f40000 )
address, leave it as it is (0x000.....) .
For Length, enter the value under the
Scatter column (see second step above) for
FAT or Usrdata ( the very last item is
recommended) . eg FAT is 0097140000
( which is 0x97140000 )."for the fat. under the scatter column is showing 00c3f40000 ,user data is showing 0043f40000.and on mtk tools the box is blue instead of green.
(28-02-2015, 04:15 AM)Tejrooney Seriously confusing. Can't MTKdroid simply do d trick of backing up. I no understand d procedures at all