Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help wanted

#11

(09-18-2014, 07:13 PM)mdavidlee Wrote: hello again guys please does anyone knows how to flash  .IMG files via cwm recovery  without pc?? thanks

You can flash via Clockworkmod recovery > Backup and restore > Advanced restore . but the folder has to be a valid CWM backup else you'll get an md5 mismatch error


Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#12
ok then i asked that question because i wanted to update cwm image because i have cwm recovery for tecno m5 version 5 and i wanted to install tourch screen version so i asked to know if i can flash it alone thanks
Reply
#13
(09-18-2014, 07:53 PM)mdavidlee Wrote: ok then i asked that question because i wanted to update cwm image  because i have cwm recovery for tecno m5 version 5 and i wanted to install tourch  screen  version so i asked to know if i can flash it alone thanks

you'll need a pc
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#14
ok but the method of pc failed with my phone and it was showing me the message that it is not supported
Reply
#15
(09-18-2014, 09:03 PM)mdavidlee Wrote: ok but the method of pc failed with my phone and it was showing me the message that it is not supported

describe the exact method used

Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#16
Try the flashify app
Reply
#17
Try the flashify app
Reply
#18
Download CTRv2.2.zip from the attachment below2. Extract the content of CTRv2.2.zip to a folder4. Enable USB debugging on the phone then connect it to the PC5. Temporarily disable your Antivirus6. Launch CTRv2.2.exe as Administrator on your PC7. CTRv2.2.exe will be automatically copied to your desktop. Click Ok to proceed8. Click Yes to disable UAC9. Click Yes for Auto-Port10. Ensure the phone is connected to the PC with USB debugging enabled then click Ok11. The Tool will Auto-detect your Chipset. you could click Ok or just leave it as it will automatically proceed12. The Tool will Auto-detect your Partition type. you could click Ok or just leave it as it will automatically proceed13. The Tool will Auto-detect your Screen resolution. you could click Ok or just leave it as it will automatically proceed14. The Tool will prompt you to reboot in recovery mode. you could click Ok or just leave it as it will automatically proceed15. If porting of Clockworkmod 6 (Carliv Touch Recovery) to the MTK phone was successful, you will get a prompt confirming the success16. Congratulations! You now have Clockworkmod Version 6 on your MTK phone
Reply
#19
auto mode failed then i used the manual port and it also failed and it showed message that my phone is not supported while my phone is tecno m5 mtk6572
Reply
#20
(09-19-2014, 10:40 AM)mdavidlee Wrote: auto mode failed then i used the manual port and it also failed  and it showed message  that my phone is not supported while my phone is tecno m5 mtk6572

we'll notify you once an alternative approach is available
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)