Hi, Guest! Login / Register




Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] How to use WiseLink Tool

#11

(03-13-2016, 04:16 PM)hovatek Wrote:
(03-12-2016, 11:51 PM)Tjaytony Wrote: Pls update the link for WiseLink tool v5.7..

thanks for the feedback.
We've replaced the above link with that of V 5.5.
you could also try https://hovatek.com/redirect.php?link=ht..._tool.html

i need password for the two version please hovatek


Reply
#12
give link to download v 5.7
Reply
#13
(07-16-2015, 11:47 AM)hovatek Wrote: WiseLink Tool is similar to SP flash tool ( https://forum.hovatek.com/thread-159.html)

Requirement

* Download WiseLink Tool V 4.1 @ https://hovatek.com/redirect.php?link=ht...t=download or V 5.5 @ https://hovatek.com/redirect.php?link=ht...55053.html
* Install VCOM drivers ( https://forum.hovatek.com/thread-440.html)
* PC
* USB Cord
* Phone to be flashed
* Firmware (it's usually in the format shown in the image below)

[Image: how-to-use-wise-link-tool-2.jpg]

Note

If you get Error 1# during flashing then use Version 5.7

Procedure

* Install WiseLink Tool on your PC
* Run WiseLink Tool as Administrator
* In the Login box, click Open RegCode File

[Image: how-to-use-wiselink-tool-1.jpg]

* Navigate to the location of the ZZZZZZZ.key file, select it and click Open

[Image: how-to-use-wiselink-tool-2.jpg]

* Click OK

[Image: how-to-use-wiselink-tool-3.jpg]

* You should now see the WiseLink Tool dashboard

[Image: how-to-use-wiselink-tool-4.jpg]

* Click the Scatter-loading File button

[Image: how-to-use-wiselink-tool-5.jpg]

* In the window that pops up, navigate to the firmware's folder and select the scatter file (its a .sca file)

[Image: how-to-use-wiselink-tool-6.jpg]

* A list with ticked boxes should now appear in WiseLink Tool

[Image: how-to-use-wise-link-tool-1.jpg]

* Click Download
* Connect the phone to the PC (while switched off with battery inside) and wait for flashing to be complete before disconnecting
This files is came from me hehehe
Reply
#14
(03-15-2016, 04:39 PM)lhandz Wrote: This files is came from me hehehe

could you help with the passwords?
Reply
#15
V5.5 actually. Buh I'll be posting a link to another version which is much better.
Reply
#16
https://www.solidfiles.com/v/Nqd8XmMKDeVXD
Dats the link to WiseLinkTool v5.8.
This version is much better. Cus it doesn't require a reg key and it's faster.

I password-protected the archive.
The password is [email protected]
Reply
#17
wheres the key :3 please give sir thanks
Reply
#18
(04-13-2016, 09:06 PM)kellorico16 Wrote: wheres the key :3 please give sir thanks

What key?
Reply
#19
Please I can't find the regcode file... . Possess help in this version 5.8
Reply
#20
Please I have done everything but I can't locate the regcode file. I.e the zzzzzzzzzz. File ... Please help
Reply










Users browsing this thread:
1 Guest(s)