Hovatek Forum MOBILE Android [Please help] OLD TECNO P5 MTK BACKUP
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] OLD TECNO P5 MTK BACKUP

[Please help] OLD TECNO P5 MTK BACKUP

Pages (3): 1 2 3 Next
jbvladiz
jbvladiz
jbvladiz
Junior Member
24
28-07-2015, 09:44 PM
#1



gratitud to all the gurus, I install hi font in my p5 after rebooting, my phone stock at tecno, so I collected a friend's backup and Flashed the bricks phone but it gave me an error so I formatted the the phone using sp flash tool and tried flashing the ROM again but still have the same error so I discovered that the backup up I used is a new OS while the dead phone is old OS plEASE grant me permission to download the old p5 stock ROM

now this is WHAT HAPPEN when boot to recovery which differs from other tecno p5 recovery mode.
POWER KEY+VOLUME UP KEY result like this:

Select Boot mode
[volume up to select.volume Down is ok.]
[Recovery mode]
[Fastboot mode]
[Normal boot]

now this is the error i got from sp flash tools



mail is jbvladiz6@gmail.com

BROM ERROR:S_COM_PORT_OPEN Fail(1013)
fail to open com port.
this error also show if i try formatting it with sp flash tools, so am inviting some help. Permit me to download old p5 mtk backup.
This post was last modified: 28-07-2015, 09:54 PM by jbvladiz.
jbvladiz
jbvladiz
jbvladiz
Junior Member
24
29-07-2015, 09:16 AM
#2
admin pls grant my request


mail
jbvladiz6@gmail.com
hovatek
hovatek
hovatek
Administrator
49,570
29-07-2015, 12:03 PM
#3
(28-07-2015, 09:44 PM)jbvladiz gratitud to all the gurus, I install hi font in my p5  after rebooting, my phone stock at tecno, so I collected a friend's backup and Flashed the bricks phone but it gave me an error so I formatted the the phone using sp flash tool and tried flashing the ROM again but still have the same error so I discovered that the backup up I used is a new OS while the dead phone is old OS plEASE grant me permission to download the old p5 stock ROM

now this is WHAT HAPPEN when boot to recovery which differs from other tecno p5 recovery mode.
POWER KEY+VOLUME UP KEY result like this:

Select Boot mode
[volume up to select.volume Down is ok.]
[Recovery mode]
[Fastboot mode]
[Normal boot]

now this is the error i got from sp flash tools



mail is jbvladiz6@gmail.com

BROM ERROR:S_COM_PORT_OPEN Fail(1013)
fail to open com port.
this error also show if i try formatting it with sp flash tools, so am inviting some help. Permit me to download old p5 mtk backup.

the COM Port error points at a problem communicating with the phone and this points at the PC port, USB cord, phone port or drivers.
important question:
as at when the phone was working fine, what used to be the color of the first TECNO to appear on boot, white or blue?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
jbvladiz
jbvladiz
jbvladiz
Junior Member
24
29-07-2015, 02:12 PM
#4
The tecno logo shows blue.
hovatek
hovatek
hovatek
Administrator
49,570
29-07-2015, 03:00 PM
#5



(29-07-2015, 02:12 PM)jbvladiz The tecno logo shows blue.

im not asking about what it shows now. im asking about what IT USED TO SHOW when you just got it, was the first TECNO BACK THEN white or blue?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
jbvladiz
jbvladiz
jbvladiz
Junior Member
24
29-07-2015, 05:38 PM
#6
Was Blue sire.
hovatek
hovatek
hovatek
Administrator
49,570
29-07-2015, 08:05 PM
#7
(29-07-2015, 05:38 PM)jbvladiz Was Blue sire.

thats Old OS P5.
keep trying the ROM you have, only this time, try a different port on the PC. you could try using a different PC and ensure to install vcom drivers @ https://www.hovatek.com/forum/thread-440.html
I've granted you permission to download our stock ROM just incase you need it. download @  https://www.hovatek.com/forum/thread-311.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
jbvladiz
jbvladiz
jbvladiz
Junior Member
24
29-07-2015, 10:10 PM
#8
Thanks sir, I downloaded the ROM and I got this error when flashing


BROM ERROR: S_FT_ENBLE_DRAM_FAIL (4032)
jbvladiz
jbvladiz
jbvladiz
Junior Member
24
30-07-2015, 10:30 AM
#9
Thanks sir, I downloaded the ROM and I
got this error when flashing
BROM ERROR:
S_FT_ENBLE_DRAM_FAIL (4032) why I'm I getting this error?? helppppppppp
hovatek
hovatek
hovatek
Administrator
49,570
30-07-2015, 01:20 PM
#10



(30-07-2015, 10:30 AM)jbvladiz Thanks sir, I downloaded the ROM and I
got this error when flashing
BROM ERROR:
S_FT_ENBLE_DRAM_FAIL (4032) why I'm I getting this error??  helppppppppp

for now, the possibilities are quite many.
just granted you permission for new OS p5. download and try flashing that.
if this fails then we'll revisit the ROM you initially flashed
This post was last modified: 30-07-2015, 01:21 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (3): 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram