Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

TECNO N9 ISSUE (BROM ERROR: 4032)

#11

(09-23-2014, 12:15 PM)dejumobi Wrote: please whats the password to the achive  vcom usb driver

the password is Hovatek


Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#12
(09-23-2014, 12:10 PM)dejumobi Wrote: how can i set the phone in off state? cause its totally dead...

finish with vcom driver installation first
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#13
Hello I have followed the 1st step of insrtalling the. Mtk preeloader odriver on my pc. When I tried to flash it again it gave this erroe with hints
BROM ERROR 4032
Enable DRAM failed
Hint: plz check your load matches to your target which is to be downloaded.
Please what do I do next? I already have the original usb cord of the tecno n9.
Reply
#14
(This post was last modified: 09-24-2014, 01:12 PM by hovatek. )
(09-24-2014, 11:53 AM)dejumobi Wrote: Hello I have followed the 1st step of insrtalling the. Mtk preeloader odriver on my pc. When I tried to flash it again it gave this erroe with hints
BROM ERROR 4032
Enable DRAM failed
Hint: plz check your load matches to your target which is to be downloaded.
Please what do I do next? I already have the original usb cord of the tecno n9.
Try format in sp flash tool @ http://forum.hovatek.com/thread-159.html (DO NOT format Bootloader) then flash the files again. lets know how that goes
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#15
After format my phonee can't charge. It will shOw the battery icon cos the batt is flat den latter go off and again shOw the chaging signal it continued like this for minutes soplz help ooooooo
Reply
#16
(This post was last modified: 09-27-2014, 12:13 AM by hovatek. )
(09-26-2014, 10:23 PM)dejumobi Wrote: After format my phonee can't charge. It will shOw the battery icon cos the batt is flat den latter go off and again shOw the chaging signal it continued like this for minutes soplz help ooooooo
After format, did Sp flash tool show the green circle? because if format was successful, the phone shouldn't show any sign of life like the charging sign its showing.
Anyways, try flashing files to the phone again and lets know how it goes. if you get any error, state the error + the hint at the bottom
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)