Hello There, Guest! Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
TECNO N9 ISSUE (BROM ERROR: 4032)
#1

Plz I mistakenly ugraded my tecno n9 with a wrong firmware. Now it cant power up its dead I went thru ur forum and I followed the process but it came across brom error 4032 I've changed my usb cord d pc am using same problem. Please help me.


Reply
#2
(09-23-2014, 11:10 AM)dejumobi Wrote: Plz I mistakenly ugraded my tecno n9 with a wrong firmware. Now it cant power up its dead I went thru ur forum and I followed the process but it came across brom error 4032 I've changed my usb cord d pc am using same problem. Please help me.

1. Do you have an MTK backup for N9? if you do, list all the files in it
2. What version of SP flash tool are you using?
2.At the end of the error 4032, you'll see [Hint] , what's does it write for the hint?
Reply
#3
(09-23-2014, 11:26 AM)hovatek Wrote:
(09-23-2014, 11:10 AM)dejumobi Wrote: Plz I mistakenly ugraded my tecno n9 with a wrong firmware. Now it cant power up its dead I went thru ur forum and I followed the process but it came across brom error 4032 I've changed my usb cord d pc am using same problem. Please help me.

1. Do you have an MTK backup for N9? if you do, list all the files in it
2. What version of SP flash tool are you using?
2.At the end of the error 4032, you'll see [Hint] , what's does it write for the hint?
Reply
#4
Still waiting for a reply
Reply
#5
(09-23-2014, 11:33 AM)dejumobi Wrote:
(09-23-2014, 11:26 AM)hovatek Wrote:
(09-23-2014, 11:10 AM)dejumobi Wrote: Plz I mistakenly ugraded my tecno n9 with a wrong firmware. Now it cant power up its dead I went thru ur forum and I followed the process but it came across brom error 4032 I've changed my usb cord d pc am using same problem. Please help me.

1. Do you have an MTK backup for N9? if you do, list all the files in it
2. What version of SP flash tool are you using?
2.At the end of the error 4032, you'll see [Hint] , what's does it write for the hint?
Reply
#6
Yes I got the mtk file from your website
Flashtool 3.1304.0.119
Hint: Cant communicate to device
Thank u
Reply
#7
My device was identified by the pc and it was identified on com port 14, but it was identified on pc as unknown device.
Reply
#8
(09-23-2014, 11:50 AM)dejumobi Wrote: Yes I got the mtk file from your website
Flashtool 3.1304.0.119
Hint: Cant communicate to device
Thank u

Might be:
1. Missing / incompatible drivers
2. Faulty usb cord / port
3. Phone not in Off state

Lets tackle one at  time.

Manually install Vcom drivers using this guide @  http://forum.hovatek.com/thread-440.html
Reply
#9
how can i set the phone in off state? cause its totally dead...
Reply
#10
please whats the password to the achive vcom usb driver
Reply





Users browsing this thread:
1 Guest(s)