Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] pls help brom error S_FT_ENABLE_DRAM_FAIL(4032)

#1

Pls help I tried flshing my tecno h3 with download only option using flash Tool I got an error saying that pmt changed for ROM; it must be downloaded I then tryed using Tryed flashing using format all+download now am getting BROM ERROR: S_FT_ENABLE_DRAM_FAIL(4032) N MY FONe is completely not turning on again pls help


Reply
#2
(08-04-2015, 09:57 AM)mike101 Wrote: Pls help I tried flshing my tecno h3 with download only option using flash Tool I got an error saying that pmt changed for ROM; it must be downloaded I then tryed using Tryed flashing using format all+download now am getting BROM ERROR: S_FT_ENABLE_DRAM_FAIL(4032) N MY FONe is completely not turning on again pls help

1. how did you get the firmware you used?
2. did formatting begin and show the success sign or you interrupted SP flash tool?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
i downloaded the tecno h3 mtk backup here and the formatting showed success
Reply
#4
hello
Reply
#5
(08-04-2015, 04:14 PM)mike101 Wrote: i downloaded the tecno h3 mtk backup here and the formatting showed success

re-install VCOM drivers then use SP flash tool V 5 format all + download
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#6
I tried that but am still getting the same error
Reply
#7
(08-04-2015, 09:43 PM)mike101 Wrote: I tried that but am still getting the same error

delete the SP flash tool folder and re-extract then try flashing.
if it persists then you'll need to get an alternative H3 stock ROM.
have you tried using the scatter file and recovery.img in the patch folder too?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#8
(This post was last modified: 08-05-2015, 04:21 PM by mike101. )

Yes I have I even tried using a different system but I keep getting the error....pls help

Reply
#9
(08-05-2015, 03:57 PM)mike101 Wrote: Yes I have I even tried using a different system but I keep getting the error....pls help

in that case, you'll need to get another H3 backup or a working H3 phone to backup
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#10
Can't I get one here cause I've been asking around no one in my area seems to have one
Reply










Users browsing this thread:
1 Guest(s)