Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] My Tecno A2 (F8) wont boot after the charging system was repaired

#1

I had problems with the charging system and after it was fixed the phone worked for about a week. After that it went totally dead. Please advice me on what to do. Just in case I would need a download it can be sent to [email protected]

Thank you.


Reply
#2
(08-13-2015, 05:10 PM)mumaru Wrote: I had problems with the charging system and after it was fixed the phone worked for about a week. After that it went totally dead. Please advice me on what to do. Just in case I would need a download it can be sent to [email protected]

Thank you.

charge the battery using an external charger and slot back in
let me know if that has any effect
also, connect it to a PC via USB cord and let me know if the PC makes a sound
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
Thanks. The battery has been charged. When the phone is connected to a PC no sound is heard.

Sent from my GT-N8000 using Hovatek mobile
Reply
#4
(08-13-2015, 09:45 PM)mumaru Wrote: Thanks. The battery has been charged. When the phone is connected to a PC no sound is heard.

Sent from my GT-N8000 using Hovatek mobile

might be a power issue but lets give a crashed OS a shot
granted! download @ https://forum.hovatek.com/thread-311.html and flash using Sp flash tool @ https://forum.hovatek.com/thread-159.html
* ensure to install vcom drivers as the guide instructs
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
(08-14-2015, 05:12 PM)hovatek Wrote:
(08-13-2015, 09:45 PM)mumaru Wrote: Thanks. The battery has been charged. When the phone is connected to a PC no sound is heard.

Sent from my GT-N8000 using Hovatek mobile

might be a power issue but lets give a crashed OS a shot
granted! download @ https://forum.hovatek.com/thread-311.html and flash using Sp flash tool @ https://forum.hovatek.com/thread-159.html
* ensure to install vcom drivers as the guide instructs

Done all the pre-flash processes but now unable to run Sp Flash Tool file (*.rar)
Reply
#6
(08-16-2015, 10:54 PM)mumaru Wrote: Done all the pre-flash processes but now unable to run Sp Flash Tool file (*.rar)

install 7zip and extract the content of the .rar file.
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#7
Thanks. Have attempted to revive the phone but no success. THE PC CANNOT COMMUNICATE WITH THE PHONE. The phone is dead except for the flash light that comes on for a few seconds when the battery is inserted.

Sent from my GT-N8000 using Hovatek mobile
Reply
#8
(08-18-2015, 12:56 AM)mumaru Wrote: Thanks. Have attempted to revive the phone but no success. THE PC CANNOT COMMUNICATE WITH THE PHONE. The phone is dead except for the flash light that comes on for a few seconds when the battery is inserted.

Sent from my GT-N8000 using Hovatek mobile

its probably a hardware power issue. you should have it looked at

Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#9
(08-18-2015, 05:57 AM)hovatek Wrote:
(08-18-2015, 12:56 AM)mumaru Wrote: Thanks. Have attempted to revive the phone but no success. THE PC CANNOT COMMUNICATE WITH THE PHONE. The phone is dead except for the flash light that comes on for a few seconds when the battery is inserted.

Sent from my GT-N8000 using Hovatek mobile

its probably a hardware power issue. you should have it looked at

Thanks.
Reply










Users browsing this thread:
1 Guest(s)