Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help with my dead bricked tecno l3 not charging or even popping up driver to flash it

#11

Nothing but few days after rooting


Reply
#12
(This post was last modified: 10-02-2014, 10:48 PM by hovatek. )
(10-02-2014, 08:30 PM)Weilee Wrote: Nothing but few days after rooting
Do a read-back / ROM dump of the good L3 using this guide @ http://forum.hovatek.com/thread-526.html  . If SP flash tool is able to read-back the good L3 then that means Sp flash tool is well setup and we're to focus on the bricked L3. Waiting...
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#13
That can't help
Reply
#14
(10-03-2014, 09:20 AM)Weilee Wrote: That can't help

We need to confirm that SP flash tool is actually setup correctly and working on your PC. A read-back of a good L3 will tell us that.
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#15
It is I used it to unbrick my other phone
Reply
#16
I have tried this before I came here you still repeating the same thing again thanks anyway hovatech
Reply
#17
(10-05-2014, 04:48 PM)Weilee Wrote: I have tried this before I came here you still repeating the same thing again   thanks anyway hovatech

You apparently don't understand the strategy here. you said SP flash tool wasn't detecting your phone. there are two possible reasons for this, either SP flash tool isn't properly setup or the phone has a hardware issue. I've asked you several times if SP flash tool is well setup but you've still not answered that question. So I asked you to do a test by doing a read-back on the good L3. If SP flash tool is able to read-back then that means SP flash tool is well setup, meaning we'll focus on the phone. You've not done the read-back I asked you to do and haven't proven that SP flash tool works fine. How do you suggest we progress given such a situation? 
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#18
(10-05-2014, 04:46 PM)Weilee Wrote: It is I used it to unbrick my other phone

You're still not answering the question
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#19
Please @ Wellee check your USB Port at the engineers...
Reply
#20
welle, u ar nt helping ur self at al. Jst do wat u ar askd to do nd it wil ease d situation.
Reply










Users browsing this thread:
1 Guest(s)