[Please help] Encryption Unsuccessful...
[Please help] Encryption Unsuccessful...
(16-08-2015, 08:42 PM)madcom5 Hello Hovatek,
Once again i have come back with a very strange problem and it's my first time to come across it. It's a TECNO S3 that when i turn on after a tecno logo it brings this Annoying message
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Encryption Unsuccessful
Encryption was interrupted and can't complete. As a result, The data on your phone is no longer accessible.
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your google account.
Reset Phone
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
But i tried hard resetting it, it didn't help, resetting using the volume down for chinese recovery with Emmc option but didn't help either. Tried to flash it but getting errors with sp flash tool. tried to correct the errors with the procedures in your site for each error but still didn't help me.
So please is there any way to resolve this problem???
Thanks.
(17-08-2015, 08:50 AM)madcom5 Yes that's right, and This is what i get when i try to flash it.
See attachment.
Thanks.
(18-08-2015, 05:38 AM)madcom5 It cannot enter any mode since it just stops at that message only give an option to reset at the bottom, and if you tap that option it takes me to recovery and after wipping user data and cache and select an option to reboot it just stop there on the android logo for recovery. I f i remove the batter and boot manually, it brings the same encryption message.
Any other try?
Thanks.
(20-08-2015, 05:28 AM)madcom5 But remember vol down + power is to go to that chinese eMMC wipe stuff, and i already did that and it didn't help.
But anyway i trust your word, THAT IS eMMC Corruption. Let's look forward for this eMMC corruption problem and see if we can solve this in future or will just be a matter of replacing.
Thanks.