Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

help pls on new tecno m3 4.4

#1

i forgot my password/pattern and i could not wipe it with hard reset ,pls i need rom to flash help me please its urgent


Reply
#2
(This post was last modified: 08-19-2015, 12:49 PM by hovatek. )
(08-18-2015, 10:43 PM)bentech Wrote: i forgot my password/pattern and i could not wipe it with hard reset ,pls i need rom to flash help me please its urgent

can the phone enter fastboot?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
no sir,
Reply
#4
(08-19-2015, 01:15 PM)bentech Wrote: no sir,

our M3 4.4 ROM is on hold for now so I'm looking at alternative ways to fix it since all you need to do is wipe /userdata
setup adb on the PC using https://forum.hovatek.com/thread-588.html 
then see if adb can detect the phone in recovery (vol up + power) or factory mode (vol down + power)
BTW, can you get access to a working M3 4.4 phone?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
YES SIR
Reply
#6
(08-19-2015, 07:30 PM)bentech Wrote: YES SIR

is the phone rooted?
if it is, then backup it using https://forum.hovatek.com/thread-468.html
waiting...
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#7
after getting another working tecno m3 and following all the process here till the task was successfull completed, i progress to using sp flash tools to flash my scatter file the proccess pass tru red,purple and finally yellow before i see a big mark on the screen that says flashing ok my phone is yet to on back plsssssssssssssssssssssssssssssss help needed urgently
Reply
#8
(08-30-2015, 02:33 PM)bentech Wrote: after getting another working tecno m3 and following all the process here till the task was successfull completed, i progress to  using sp flash tools to flash my scatter file the proccess pass tru red,purple and finally yellow before i see a big mark on the screen that says flashing ok my phone is yet to on back plsssssssssssssssssssssssssssssss help needed urgently

is the phone stuck at logo? if it is then try entering factory mode (volume down + power) and selecting the option with eMMC in its name

Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#9
not at all sir
Reply
#10
(09-06-2015, 02:34 PM)bentech Wrote: not at all sir

whats the present condition of the phone?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)