Hovatek Forum MOBILE Android [Please help] Micromax A27 buzzes endlessly.
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Micromax A27 buzzes endlessly.

[Please help] Micromax A27 buzzes endlessly.

Pages (2): Previous 1 2
techie_28
techie_28
techie_28
Junior Member
16
11-10-2015, 02:52 PM
#11



I tried this on another system but the problem is still the same.
I loaded the "ze25paa_060.pac"(stock rom file for MicroMax Bolt A27) into the flash tool and clicked Download but it did not show me the Loading message in the progress panel as stated in the tutorial.

I pressed the Volume download key and plugged into the USB port after which phone starts buzzing without showing anything on the screen(the phone's bricked state that I am trying to resolve).

Ideas please?
hovatek
hovatek
hovatek
Administrator
49,570
11-10-2015, 08:26 PM
#12
(11-10-2015, 02:52 PM)techie_28 I tried this on another system but the problem is still the same.
I loaded the "ze25paa_060.pac"(stock rom file for MicroMax Bolt A27) into the flash tool and clicked Download but it did not show me the Loading message in the progress panel as stated in the tutorial.

I pressed the Volume download key and plugged into the USB port after which phone starts buzzing without showing anything on the screen(the phone's bricked state that I am trying to resolve).

Ideas please?

did you install SCI and Google USB drivers?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
techie_28
techie_28
techie_28
Junior Member
16
12-10-2015, 06:36 AM
#13
I have installed SCI Android USB2serial(COM 3) and it is visible to me with yellow exclamation mark in the device manager list.

I used adb-setup-1.4.2.exe and it installed Google.inc(WinUsb)AndroidUsbDeviceClass drivers also but still phone doesnt respond to the tool.

I plugged it in while pressing the Vol Down key but phone starts vibrating endlessly without ever responding to the tool.The tool doesnt even shows the "In Progress" message when the download is clicked.
hovatek
hovatek
hovatek
Administrator
49,570
12-10-2015, 11:23 AM
#14
(12-10-2015, 06:36 AM)techie_28 I have installed SCI Android USB2serial(COM 3) and it is visible to me with yellow exclamation mark in the device manager list.

I used adb-setup-1.4.2.exe and it installed Google.inc(WinUsb)AndroidUsbDeviceClass drivers also but still phone doesnt respond to the tool.

I plugged it in while pressing the Vol Down key but phone starts vibrating endlessly without ever responding to the tool.The tool doesnt even shows the "In Progress" message when the download is clicked.

Ok. Which version of the tool are you using?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
techie_28
techie_28
techie_28
Junior Member
16
14-10-2015, 09:50 AM
#15



I have tried many versions but to no use,have used the version mentioned in the tut also i.ee
R2.9.7003.
Please help..  Blush Blush
hovatek
hovatek
hovatek
Administrator
49,570
14-10-2015, 12:37 PM
#16
(14-10-2015, 09:50 AM)techie_28 I have tried many versions but to no use,have used the version mentioned in the tut also i.ee
R2.9.7003.
Please help..  Blush Blush

Let me try replicate this here. 
The tool isn't showing waiting right?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
techie_28
techie_28
techie_28
Junior Member
16
15-10-2015, 06:20 PM
#17
Yes,as per the tutorial "Progress" status message should appear before attaching the phone but it doesn't shows up for mr.
Could the .pac file be the cause?I dwnloaded it from the official source.

Thanks.. Smile
hovatek
hovatek
hovatek
Administrator
49,570
16-10-2015, 09:37 AM
#18
(15-10-2015, 06:20 PM)techie_28 Yes,as per the tutorial "Progress" status message should appear before attaching the phone but it doesn't shows up for mr.
Could the .pac file be the cause?I dwnloaded it from the official source.

Thanks.. Smile

not the pac file. its between the drivers and the software

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
techie_28
techie_28
techie_28
Junior Member
16
20-10-2015, 05:09 AM
#19
As per the tutorial, progress sign should appear as soon as we load the .pac file and click Download button.

This step is before plugging the phone via USB but doesn't happens for me at all.

Regards.
hovatek
hovatek
hovatek
Administrator
49,570
20-10-2015, 03:01 PM
#20



(20-10-2015, 05:09 AM)techie_28 As per the tutorial, progress sign should appear as soon as we load the .pac file and click Download button.

This step is before plugging the phone via USB but doesn't happens for me at all.

Regards.

its a driver thing.
fix using https://www.hovatek.com/forum/thread-4870.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (2): Previous 1 2
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram