Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Request to download Tecno N9 MTK Backup

#1

Hi,
Please grant me the permission to download Tecno N9 MTK Backup to flash my Tecno N9. My gmail address is [email protected]
I forgot the pattern and I tried to hard rest it but now it is hanging at Tecno logo.
Thank youm


Reply
#2
(08-27-2015, 07:30 AM)kazeemdgsm Wrote: Hi,
Please grant me the permission to download Tecno N9 MTK Backup to flash my Tecno N9. My gmail address is [email protected]
I forgot the pattern and I tried to hard rest it but now it is hanging at Tecno logo.
Thank youm

granted! download @ https://forum.hovatek.com/thread-311.html and flash using Sp flash tool @ https://forum.hovatek.com/thread-159.html
Reply
#3
Hi,
Thanks for ur reply. I have downloaded the file but there are 2 scatter files in the backup.
I flashed the phone with the 1st scatter file (MT6589_Android_scatter_emmc) there was no difference in the behaviour of the phone and I tried to hardreset it but the phone didn't enter recovery mode so I formated the phone and reflash it with the same scatter file but the phone is now rebooting at tecno logo(it was hanging at Tecno logo before). And still it is not entering recovery mode.
Should I use the second scatter file(MT6589_Android_scatter_emmc_PMT) to flash the phone now?
Reply
#4
(08-28-2015, 09:53 PM)kazeemdgsm Wrote: Hi,
Thanks for ur reply. I have downloaded the file but there are 2 scatter files in the backup.
I flashed the phone with the 1st scatter file (MT6589_Android_scatter_emmc) there was no difference in the behaviour of the phone and I tried to hardreset it but the phone didn't enter recovery mode so I formated the phone and reflash it with the same scatter file but the phone is now rebooting at tecno logo(it was hanging at Tecno logo before). And still it is not entering recovery mode.
Should I use the second scatter file(MT6589_Android_scatter_emmc_PMT) to flash the phone now?

they should have the same effect but go ahead anyway.
ensure there's a formatted SD card in the phone during flashing
Reply
#5
Hello,
I have reflash the phone with the other scatter file with formated memmory card in the phone during the flashing but the phone is still rebooting at Tecno logo, please what can I do now?
Reply
#6
(08-29-2015, 09:58 PM)kazeemdgsm Wrote: Hello,
I have reflash the phone with the other scatter file with formated memmory card in the phone during the flashing but the phone is still rebooting at Tecno logo, please what can I do now?

boot into recovery mode (vol up + power) and do a factory reset then factory mode (vol down + power) and clear eMMC
Reply
#7
The phone doesn't enter recovery mode with both vol up and vol down. I even use volcano box to format it but the phone is still rebooting at tecno logo.
Reply
#8
(08-31-2015, 02:11 AM)kazeemdgsm Wrote: The phone doesn't enter recovery mode with both vol up and vol down. I even use volcano box to format it but the phone is still rebooting at tecno logo.

what does it show when you hold volume up + power?
Reply
#9
It doesn't show anything, it just continue to reboot and it doesn't go off if I try to off it. I have to remove the baterry in order to off the phone.
Reply
#10
(08-31-2015, 03:38 PM)kazeemdgsm Wrote: It doesn't show anything, it just continue to reboot and it doesn't go off if I try to off it. I have to remove the baterry in order to off the phone.

format then flash one file at a time.
hope you're using SP flash tool V 5.x
Reply










Users browsing this thread:
1 Guest(s)