Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

PLEASE HELP! I HARD BRICKED MY TECNO PHANTOM A+

#11

(10-19-2014, 02:23 PM)shyllon Wrote: But please can i flash off everything i dont need the old data again.and where would i paste the mtk backup.

No. you're to flash only system.img first. you need to thread with caution at this stage. As for your second question, are you having problems using SP flash tool or what? because the second question isnt clear


Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#12
(10-19-2014, 05:38 PM)hovatek Wrote:
(10-19-2014, 02:23 PM)shyllon Wrote: But please can i flash off everything i dont need the old data again.and where would i paste the mtk backup.

No. you're to flash only system.img first. you need to thread with caution at this stage. As for your second question, are you having problems using SP flash tool or what? because the second question isnt clear

I mean the mtk stock rom that i downloaded,where would i put it,on phone memory or the pc,and which folder if its going to be on the pc?
Reply
#13
(10-19-2014, 08:17 PM)shyllon Wrote: I mean the mtk stock rom that i downloaded,where would  i put it,on phone memory or the pc,and which folder if its going to be on the pc?

its a zip file so extract it to any folder on you pc. you can then proceed with the sp flash tool guide. in sp flash tool, click scatter loading then select scatter file from the extracted folder in the window that pops up. you can see the video if you need a visual guide
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#14
Ok now after pressing scatter and loading it then i should choose system to bah?
Reply
#15
(10-19-2014, 09:46 PM)shyllon Wrote: Ok now after pressing scatter and loading it then i should choose system to bah?

No.

Launch Sp flash tool
Click scatter loading
A Window will pop up
In the window that pops up, navigate  to the folder you extracted from the MTK backup you downloaded
Select the scatter file (text file that has "scatter" in its name)
Sp flash tool will show a list with some ticked
Untick all except Android
click download and Yes/OK to proceed
Switch off the phone then connect to PC

Here's the Sp flash tool guide @ http://forum.hovatek.com/thread-159.html , it explains more
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#16
Pls!!!!!!!!!! "I need help' a customers spd itel ite1500 was bricked after trying to flash with Research download software!
I need a pac file for it plssssssssssssssssssssssssssss!!
This is my pin; 25AC55E3
Reply
#17
(10-20-2014, 08:13 PM)CINO22 Wrote: Pls!!!!!!!!!! "I need help' a customers spd itel ite1500 was bricked after trying to flash with Research download software!
I need a pac file for it plssssssssssssssssssssssssssss!!
This is my pin; 25AC55E3

please, create a new thread for this by clicking http://forum.hovatek.com/newthread.php?fid=4
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#18
While trying to flash my phone I tried installing mediatek vcom driver then I got this error a step after final installation. "The software for this device is now installed, but may not work correctly. This device cannot start (code 10)" That's the problem and when I open sp flash tool to flash after ticking USB mode and loading scatter file when I chose the file to download and I click download it would only display battery charge bar then go back to bootloop when I connect the phone.
Reply
#19
(10-22-2014, 06:07 PM)shyllon Wrote: While trying to flash my phone I tried installing mediatek vcom driver then I got this error a step after final installation. "The software for this device is now installed, but may not work correctly. This device cannot start (code 10)" That's the problem and when I open sp flash tool to flash after ticking USB mode and loading scatter file when I chose the file to download and I click download it would only display battery charge bar then go back to bootloop when I connect the phone.

the battery sign when trying to flash in sp flash tool means vcom drivers have not been installed on the PC. As for the error 10, are you sure you selected the Correct .inf file from the correct folder as specified by the tutorial? 64bit for 64bit, the other for 32 bit. as for the error 10, read http://forum.hovatek.com/thread-596.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#20
(10-22-2014, 06:49 PM)hovatek Wrote:
(10-22-2014, 06:07 PM)shyllon Wrote: While trying to flash my phone I tried installing mediatek vcom driver then I got this error a step after final installation. "The software for this device is now installed, but may not work correctly. This device cannot start (code 10)" That's the problem and when I open sp flash tool to flash after ticking USB mode and loading scatter file when I chose the file to download and I click download it would only display battery charge bar then go back to bootloop when I connect the phone.

the battery sign when trying to flash in sp flash tool means vcom drivers have not been installed on the PC. As for the error 10, are you sure you selected the Correct .inf file from the correct folder as specified by the tutorial? 64bit for 64bit, the other for 32 bit. as for the error 10, read http://forum.hovatek.com/thread-596.html
Reply










Users browsing this thread:
1 Guest(s)