Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

S_DA_SDMMC_WRITE_FAILED (3149)

#21

(12-21-2014, 12:25 PM)chandan Wrote: No luck. Sad


Memory test result:

=============== Memory Detection Report ===============

Internal RAM:

Size = 0x00020000 (128KB)

External RAM:

Type = DRAM

Size = 0x40000000 (1024MB/8192Mb)

NAND Flash:

ERROR: NAND Flash was not detected!

EMMC :

EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000E7000000(3696MB)

try doing a readback of only boot.img using this guide @ https://forum.hovatek.com/thread-526.html . lets know how that goes


Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#22
Yes boot.img successfully created of size '6,291,456 bytes'.

what should I do next? shall i go for 'Backing up / Dumping the entire ROM' ?
Reply
#23
(12-21-2014, 04:06 PM)chandan Wrote: Yes boot.img successfully created of size '6,291,456 bytes'.

what should I do next? shall i go for 'Backing up / Dumping the entire ROM' ?

no, dump one file at a time. use the blocks map for this. lets know if any file's readback gives an error
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#24
(This post was last modified: 12-24-2014, 06:45 PM by chandan. )
I cannot connect my phone with MTK Droid tools. I am not sure which blocks map to use?
Reply
#25
(This post was last modified: 12-24-2014, 09:14 PM by hovatek. )
(12-24-2014, 06:44 PM)chandan Wrote: I cannot connect my phone with MTK Droid tools. I am not sure which blocks map to use?
based on all outcomes, i'll strongly advice you try using another PC and also another stock ROM
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#26
I'd already tried with another laptop.

What do you mean by try using another stock ROM? should I try other than 'Micromax A116 Stock ROM' ?
Reply
#27
(This post was last modified: 12-25-2014, 08:36 AM by hovatek. )
(12-25-2014, 06:06 AM)chandan Wrote: I'd already tried with another laptop.
What do you mean by try using another stock ROM? should I try other than 'Micromax A116 Stock ROM' ?
no, i mean check for another Micromax A116 Stock ROM . you could also look @ https://forum.hovatek.com/thread-938.html and search other websites.
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#28
(10-29-2014, 07:23 AM)hovatek Wrote:
(10-29-2014, 06:40 AM)Charudatt Wrote: No Luck Sad
Here's scatter file attachement

here's the content of your scatter file
PRELOADER 0x0
{
}
MBR 0x600000
{
}
EBR1 0x680000
{
}
__NODL_PMT 0x700000
{
}
__NODL_PRO_INFO 0xb00000
{
}
__NODL_NVRAM 0xe00000
{
}
__NODL_PROTECT_F 0x1300000
{
}
__NODL_PROTECT_S 0x1d00000
{
}
__NODL_SECCFG 0x2700000
{
}
UBOOT 0x2720000
{
}
BOOTIMG 0x2780000
{
}
RECOVERY 0x2d80000
{
}
SEC_RO 0x3380000
{
}
__NODL_MISC 0x3980000
{
}
LOGO 0x3a00000
{
}
EBR2 0x3d00000
{
}
__NODL_EXPDB 0x3d80000
{
}
ANDROID 0x4780000
{
}
CACHE 0x2d180000
{
}
USRDATA 0x34f80000
{
}
__NODL_FAT 0x74f80000
{
}
__NODL_BMTPOOL 0xFFFF00a8
{
}


. what your going to do is to change __NODL_FAT 0x74f80000   to  FAT 0x74f80000 by deleting __NODL_ then saving the file. now, try again.


if it doesn't work then list all the files present in your MTK droid tools backup


Hello Admin, I did that change "__NODL_FAT 0x74f80000   to  FAT 0x74f80000" but I still get that BROM ERROR: S_DA_SDMMC_WRITE_FAILED (3149).

I'm using SP_FLash_Tool_v3.1320.0.174 via Windows XP
Cellular phone is Cubot GT99

I hope you can help me with this. Before my phone stopped working, it says "encryption unsuccessful then after some time it went totally blank (bricked maybe --no more notification led, not charging but still detectable via PC)

I hope you could help me with this, Thnaks!
Reply
#29
(This post was last modified: 04-07-2017, 12:08 AM by sarthakz9. )
(10-29-2014, 11:19 AM)hovatek Wrote:
(10-29-2014, 10:47 AM)Charudatt Wrote: Followed the same procedure, but now, it's giving me 'S_DL_PMT_ERR_NO_SPACE (5069)' with no hint available.

tell me what exactly you did, scatter file you used and what version of sp flash tool that resulted in this new error

also, list all the files in your backup folder

i'm having the same error. after doing a memory test these were the results 
=============== Memory Detection Report ===============

Internal RAM:

Size = 0x00020000 (128KB)

External RAM:

Type = DRAM

Size = 0x40000000 (1024MB/8192Mb)

NAND Flash:

ERROR: NAND Flash was not detected!

EMMC :

EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000E7000000(3696MB)

============ RAM Test ============

Data Bus Test :
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15]
OK!!

Address Bus Test :
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21][A22][A23][A24][A25][A26][A27][A28][A29]
OK!!

RAM Pattern Test :
Writing ...
0x44332211, 
0xA5A5A5A5, 
0xA5A5A500, 
0xA500A500, 
0xA5000000, 
0x00000000, 
0xFFFF0000, 
0xFFFFFFFF, 
OK!!

Increment/Decrement Test :
Writing ...
OK!!

edit:
============ EMMC Test ============

EMMC Pattern Test(0x5A5A):

FAILED!!

i have done a physical format after which my emmc test is showing this error. previously it was showing emmc not detected.

any ideas ?
Reply
#30
(04-07-2017, 12:05 AM)sarthakz9 Wrote: i'm having the same error. after doing a memory test these were the results 
=============== Memory Detection Report ===============

Internal RAM:

Size = 0x00020000 (128KB)

External RAM:

Type = DRAM

Size = 0x40000000 (1024MB/8192Mb)

NAND Flash:

ERROR: NAND Flash was not detected!

EMMC :

EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000E7000000(3696MB)

============ RAM Test ============

Data Bus Test :
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15]
OK!!

Address Bus Test :
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21][A22][A23][A24][A25][A26][A27][A28][A29]
OK!!

RAM Pattern Test :
Writing ...
0x44332211, 
0xA5A5A5A5, 
0xA5A5A500, 
0xA500A500, 
0xA5000000, 
0x00000000, 
0xFFFF0000, 
0xFFFFFFFF, 
OK!!

Increment/Decrement Test :
Writing ...
OK!!

edit:
============ EMMC Test ============

EMMC Pattern Test(0x5A5A):

FAILED!!

i have done a physical format after which my emmc test is showing this error. previously it was showing emmc not detected.

any ideas ?

Please create a new thread, this is someone else's support thread
see https://forum.hovatek.com/thread-514.html for how to create a thread
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)