Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

i bricked my htc one x now it cant boot past the htc logo.

#41

that is the screenshot of the error report i get whenever i try to use adb command.. ut fastboot commands works fine.. pls what is the problem?


Reply
#42
(This post was last modified: 09-23-2015, 02:48 PM by hovatek. )
(09-23-2015, 01:18 AM)xsantos Wrote: that is the screenshot of the error report i get whenever i try to use adb command..  ut fastboot commands works fine.. pls what is the problem?
Here's for Plan A (flashing a custom ROM)

ADB drivers for HTC obviously aren't installed on your PC
try the PdaNet drivers installation method @ https://forum.hovatek.com/thread-317.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#43
(This post was last modified: 09-23-2015, 03:05 PM by hovatek. )
(09-22-2015, 12:46 PM)xsantos Wrote: Thank you.. but my htc is already showing S OFF since... asin it shows at the top of the bootloader something like ENDEAVOR U S OFF RL, does that mean it is lready s off?

i'd been expecting this reply.
now, you need to write CID to your phone.
in fastboot, run this command

Code:
fastboot oem writecid 11111111
fastboot reboot

boot the phone into fastboot again and run
Code:
fastboot getvar all
let me know what CID now says
this will enable you flash any of the RUUs that match RUU...Europe....x.xx.401.x...
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#44
(09-23-2015, 02:56 PM)hovatek Wrote:
(09-22-2015, 12:46 PM)xsantos Wrote: Thank you.. but my htc is already showing S OFF since... asin it shows at the top of the bootloader something like ENDEAVOR U S OFF RL, does that mean it is lready s off?

i'd been expecting this reply.
now, you need to write CID to your phone.
in fastboot, run this command

Code:
fastboot oem writecid 11111111
fastboot reboot

boot the phone into fastboot again and run
Code:
fastboot getvar all
let me know what CID now says
this will enable you flash any of the RUUs that match RUU...Europe....x.xx.401.x...

Attached Files
.png   cid.png (Size: 39.73 KB / Downloads: 4)
Reply
#45
that is the screenshot of what i got after typing the command.. i ran the first command you gave me concerning the cid number and it showed success.. then i ran the fastboot getvar all command and that is what i saw.
Reply
#46
(This post was last modified: 09-24-2015, 03:16 PM by hovatek. )
(09-24-2015, 12:28 AM)xsantos Wrote: that is the screenshot of what i got after typing the command.. i ran the first command you gave me concerning the cid number  and it showed success.. then i ran the fastboot getvar all command and that is what i saw.

go to hboot (same place you saw S-Off). what does CID say there?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#47
it says CID 11111111
Reply
#48
(This post was last modified: 09-25-2015, 08:23 AM by hovatek. )
(09-24-2015, 09:31 AM)xsantos Wrote: it says CID 11111111

now, boot the phone into fastboot
after that, try installing the Europe RUU

Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#49
i did tht but it still did not work, it showed me image error.. that the file does not match or something.... i have a feeling that am not using a correct ruu.. please give me a link to download a good one that.. please help me find one.
Reply
#50
(This post was last modified: 09-25-2015, 08:50 AM by hovatek. )
(09-24-2015, 09:29 PM)xsantos Wrote: i did tht but it still did not work, it showed me image error.. that the file does not match or something.... i have a feeling that am not using a correct ruu.. please give me a link to download a good one that.. please help me find one.

you should't be getting that error. lemme check if we're missing something
1. in fastboot, run this command
Code:
fastboot getvar cid

2. let me see a picture of your phone in Hboot
3. maybe its a CDMA/GSM thing. wha's the exact error message you got when flashing the RUU. specifics please
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)