Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] List of MTK Droid Tools errors and how to fix them

#1
(This post was last modified: 12-23-2015, 04:09 PM by hovatek. )

Ensure to see the MTK Droid tools guides @ https://forum.hovatek.com/thread-468.html and https://forum.hovatek.com/thread-455.html to be sure you're doing things right.

# See the video tutorial below or @ http://youtu.be/AJLgSD9zHb8






MTK Droid Tools errors and solutions

* The device isn't revealed. Connect or reconnect the cable!

Solution: Ensure to install Mediatek drivers using PdaNet and enable USB debugging on the phone

* Error: file adbd not install
 
Solution: Read https://forum.hovatek.com/thread-1219.html to fix it

* Insufficient space on device

Solution: Ensure there's at least 4GB free space on both phone storage and SD card (if supported) then install Busybox on the phone

* Preparation of files for FlashTool is impossible, file isn't found

Solution: Remove all scatter files in the backup folder except one and rename this last one to MT65??_Android_scatter ( where "??" represents the number for your phone model e.g MT6572_Android_scatter)

* ERROR: Zero file, no space left on device!

Solution: Read https://forum.hovatek.com/thread-6407.html

* -- ERROR  :  --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!

Solution: Slot in an SD card into the phone and install Busybox on the phone
Ensure the phone is an MTK phone
Download MTK Droid Tools froma different source

* ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to the phone!

Solution: Ignore it. If MTK droid tools still refuses to work then download another copy from a different source

* Preparation of files for flash Tool is impossible . file isn't found: C:\....MT****_Android_scatter*.txt

Solution: Either the backup is incomplete (missing scatter file) or the backup contains two scatter files; in which case you should delete one and try again

* SU inaccessible 

Solution: Ensure the phone is rooted. After clickking ROOT, click Yes on PC and Grant on phone. Check the super user application on the phone (might vary with rooting technique) to be sure that ADBis granted root permissions

* --- ERROR :No find KernelGZ  --- ERROR :No Split Boot Image

Solution: Try using the TWRP recovery porting method @ https://forum.hovatek.com/thread-5162.html or the Carliv Touch Recovery porting method @ https://forum.hovatek.com/thread-182.html

* --- ERROR :dev/radio/pttycmd1 inaccessible , should be Root Shell 
 --- ERROR :pttycmd1 device NOT found! 

Solution: Fix Unknown Baseband by flashing a compatible Stock ROM

* --- ERROR during copying files between phone and PC

Solution: Download MTK Droid tools from a different source

* It is impossible to start ADB

Solution: Download MTK Droid tools from a different source


Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#2
Pls sir I encounter an error. (It is impossible to start ADB) during d MTK Droid root process... Pls how can I fix it... Email: [email protected]
Reply
#3
(10-15-2015, 03:48 AM)ridohbest Wrote: Pls sir I encounter an error. (It is impossible to start ADB) during d MTK Droid root process... Pls how can I fix it... Email: [email protected]

Download MTK droid tools from a different source
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#4
When I try another source this is what i encounter 'Error: file adbd not install'
Reply
#5
(10-15-2015, 03:38 PM)ridohbest Wrote: When I try another source this is what i encounter 'Error: file adbd not install'

the solution to that is in the guide above
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#6
I encounter this error " Preparation of files for FlashTool is impossible, file isn't found" and have the solution above, but will I delete all the file in the backup file, and which file will leave, also how will I rename the file I leave undelete, with tecno H7
Reply
#7
(10-16-2015, 04:10 PM)ridohbest Wrote: I encounter this error " Preparation of files for FlashTool is impossible, file isn't found" and have the solution above, but will I delete all the file in the backup file, and which file will leave, also how will I rename the file I leave undelete, with tecno H7

only the scatter file if there's more than one
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#8
sir what is comfusing is how to identiy the scatter file that i will delete and the one that i will rename

Reply
#9
(10-16-2015, 06:26 PM)ridohbest Wrote: sir what is comfusing is how to identiy the scatter file that i will delete and the one that i will rename

* check the backup folder if there is no scatter file then the backup wasn't successful
* If on the other hand there are 2 scatter files then delete one (anyone)
Reply
#10
i check all the file in the backup folder but there is no file name scatter file and during the backup it write task is complete at the end
Reply










Users browsing this thread:
1 Guest(s)