[Downloads] PERMISSION TO DOWNLOAD TECNO H3 MTK BACKUP
[Downloads] PERMISSION TO DOWNLOAD TECNO H3 MTK BACKUP
(09-09-2015, 03:22 PM)evansa mobile hang on logo.
kindly assit.
MAIL ADD.:evansfawaz@gmail.com
(09-09-2015, 07:46 PM)hovatek(09-09-2015, 03:22 PM)evansa mobile hang on logo.
kindly assit.
MAIL ADD.:evansfawaz@gmail.com
no need to panic, it can easily be fixed
granted! download Tecno H3 Patch @ https://www.hovatek.com/forum/thread-311.html
you'll find a recovery.img in the ctr_recovery_h3 . flash it to the phone using SP flash tool @ http://www.hovatek.com/forum/thread-159.html
the phone should now be able to boot into carliv touch recovery
waiting so we proceed....
(09-09-2015, 11:40 PM)evansa Phone now dead,cannot come on.i did a mistake i think.
i did format whole flash except boot loader.
it was not writing the recovery at first.then i did the format.now i can write the recovery but phone not boot.
Think i will now need stock ROM to repair all the erased data.
(10-09-2015, 08:23 AM)hovatekPhone...brom error s_ft_enable_dram_fail 4032.(09-09-2015, 11:40 PM)evansa Phone now dead,cannot come on.i did a mistake i think.
i did format whole flash except boot loader.
it was not writing the recovery at first.then i did the format.now i can write the recovery but phone not boot.
Think i will now need stock ROM to repair all the erased data.
i don't recall asking you to format.
granted! download H3 MTK backup @ https://www.hovatek.com/forum/thread-311.html and flash using Sp flash tool @ https://www.hovatek.com/forum/thread-159.html
the phone should now be stuck at logo
waiting.....
(10-09-2015, 10:36 AM)evansa Phone...brom error s_ft_enable_dram_fail 4032.
i have tried all possible ways...v-,v+ power combinations.
uninstal drivers and instal as per your tutorial.
this is proving to be pain in the neck.
BTW i have NCK flash tool and when i read info,it give bellow log info.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM9)
Phone detected...Please wait
Sending DA agent, please wait...
Connect error: An error occurs might be the following reasons:
1. There does not exist the MTK_ROM_INFO structure in the ROM;
2. There does not exist the MTK_BLOADER_INFO structure in the boot-loader;
3. It is not NFB-booting;
when flash it give log info:
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM9)
Phone detected...Please wait
Sending DA agent, please wait...
Connect error: S_FT_ENABLE_DRAM_FAIL
Error connect phone, aborting.
All done.
(10-09-2015, 12:49 PM)hovatek(10-09-2015, 10:36 AM)evansa Phone...brom error s_ft_enable_dram_fail 4032.
i have tried all possible ways...v-,v+ power combinations.
uninstal drivers and instal as per your tutorial.
this is proving to be pain in the neck.
BTW i have NCK flash tool and when i read info,it give bellow log info.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM9)
Phone detected...Please wait
Sending DA agent, please wait...
Connect error: An error occurs might be the following reasons:
1. There does not exist the MTK_ROM_INFO structure in the ROM;
2. There does not exist the MTK_BLOADER_INFO structure in the boot-loader;
3. It is not NFB-booting;
when flash it give log info:
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM9)
Phone detected...Please wait
Sending DA agent, please wait...
Connect error: S_FT_ENABLE_DRAM_FAIL
Error connect phone, aborting.
All done.
use a Windows 7 PC and SP flash tool V 5
(10-09-2015, 01:38 PM)evansa Iam using win 7 and sp tool 5.1516.00.
Driver is peaking from MTK usb port but yellow triangle in both DA usb vcom port and preloader usb vcom.i have disabled signature verification but still yellow triangle.and not picking from preloader and DA.