Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

My Tecno Phantom N9 wont power up

#41

 samuelzio Wrote:The working tab didnt come inspite leaving it to charge for 6 hours. When I connect the charger to the device,  white border acround the screen shows and it would blink for like 5 times before stopping.

Also, in that state i successfully copid the boot.img, but when i tired doing the FAT, i got to 12% and sais S_FT_READFAIL or something le that.

What can i do from here.
Thanks

was it blinking that white border before you charged it for several hours?


Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#42
(11-07-2014, 09:52 AM)samuelzion Wrote: What can i do from here.
Thanks

let's review what you have there
1. Bricked n9
2. Drained Working N9
3. MTK backup for n9 from our forum
4. SP Flash tool version 5
confirm you have all four
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#43
(11-07-2014, 11:34 AM)hovatek Wrote:
(11-07-2014, 09:52 AM)samuelzion Wrote: What can i do from here.
Thanks

let's review what you have there
1. Bricked n9
2. Drained Working N9
3. MTK backup for n9 from our forum
4. SP Flash tool version 5
confirm you have all four

1. it only blinks when i connect to power source

2. I have all 4 items you listed

How do we proceed? tnx
Reply
#44
samuelzi Wrote:1. it only blinks when i connect to power source

2. I have all 4 items you listed

How do we proceed? tnx

lets focus on the bricked one, disconnect the good one from power, we'll focus on it shortly
. for the bricked one, load the scatter file in sp flash tool v 5 and select format + download all. proceed with flashing to the bricked one
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#45
(11-07-2014, 04:35 PM)hovatek Wrote:
samuelzi Wrote:1. it only blinks when i connect to power source

2. I have all 4 items you listed

How do we proceed? tnx

lets focus on the bricked one, disconnect the good one from power, we'll focus on it shortly
. for the bricked one, load the scatter file in sp flash tool v 5 and select format + download all. proceed with flashing to the bricked one

Good morning. Pls can you just write out all u want me to do on the bricked one so that when i am online and u are not i can have access to them. Thanks

Reply
#46
(11-08-2014, 08:03 AM)samuelzion Wrote: Good morning. Pls can you just write out all u want me to do on the bricked one so that when i am online and u are not i can have access to them. Thanks

you're going to use the format option in version 5 before flashing files to it.
consider holding button combos before connecting to PC like
volume increase
volume decrease
power + volume up
power + volume down
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#47
(11-08-2014, 08:12 AM)hovatek Wrote:
(11-08-2014, 08:03 AM)samuelzion Wrote: Good morning. Pls can you just write out all u want me to do on the bricked one so that when i am online and u are not i can have access to them. Thanks

you're going to use the format option in version 5 before flashing files to it.
consider holding button combos before connecting to PC like
volume increase
volume decrease
power + volume up
power + volume down

After which what next?
Reply
#48
(11-08-2014, 08:48 AM)samuelzion Wrote: After which what next?

let's know how that goes
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#49
(11-08-2014, 08:48 AM)samuelzion Wrote: After which what next?

what's the state of the n9 that went dead after disconnecting from SP flash tool? someone's phone had the same issue after yours and he followed the [email protected] http://forum.hovatek.com/thread-808.html , he's phone is back to life now
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#50
hovat Wrote:
samuelzion Wrote:After which what next?

what's the state of the n9 that went dead after disconnecting from SP flash tool? someone's phone had the same issue after yours and he followed the [email protected] http://forum.hovatek.com/thread-808.html  , he's phone is back to life now

The drained tab I got from someone already has battery issues as in it runs flat very quickly becuase he hasnt used it for a while. Would that be the problem?

I am also going to try doing the format with SP flash tool by 4pm, can you pls be on standby for me?

Thank you
Reply










Users browsing this thread:
1 Guest(s)