Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Tecno H3 is asking for a privacy protection password.

#11

done, what next


Reply
#12
(09-14-2015, 05:26 PM)hovatek Wrote:
(09-14-2015, 04:09 PM)mundiaks Wrote: i flashed it. how do i go into the mode you are talking and what do i do?

switch off > hold volume increase without releasing > hold power button and keep holding both buttons till it boots into recovery mode

okay its on recovery mode. please give more steps ahead so i dont have to keep waiting, just a suggestion
Reply
#13
(09-14-2015, 05:43 PM)mundiaks Wrote:
(09-14-2015, 05:26 PM)hovatek Wrote:
(09-14-2015, 04:09 PM)mundiaks Wrote: i flashed it. how do i go into the mode you are talking and what do i do?

switch off > hold volume increase without releasing > hold power button and keep holding both buttons till it boots into recovery mode

okay its on recovery mode. please give more steps ahead so i dont have to keep waiting, just a suggestion

how do i make the computer recognize my sd card in the phone when connected by USB so i can transfer the stock mod zip file to the sd card and install in recovery?
Reply
#14
(09-14-2015, 05:44 PM)mundiaks Wrote: how do i make the computer recognize my sd card in the phone when connected by USB so i can transfer the stock mod zip file to the sd card and install in recovery?

its one step at a time please. I don't want to have to repeat myself
Under Mounts and Storage, select Mount SD card then connect the phone to PC via USB cord.
transfer the stock_mod_tecno_h3 zip file in the patch to the Sd card then unmount.
next, format system under mounts and storage the flash the zip file in recovery mode
reboot the phone and it should now be able to boot to home screen with Null IMEI
waiting.....
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)