Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] MTK6582 DG280 Flash Problem

#1

Hello Members

I have a MTK6582 Smartphone (LEO DG280 from Doogee) after i bought this phone i had some problems with the Touch Screen he not responding anymore. That´s why i take the decision to load the new firmware from the Doogee Homepage after I download it and install the (FLASH TOOL 5.1343.01) and Install the (MediaTek USB VCOM drivers) manually by ignoring the signature i get the (code10 error) if i do ignore this error and start use the Flash Tools (nothing happen) The Phone can´t switch to META mode even if i push the switch off button and the volume up/down button at the same time . The Phone recognize by my computer only as ( MTK USB Port (COMx) I use an Windows 7 64bit Computer and of course i install the 64bit Mediatek Drivers. I restart the computer after install the drivers and i have reinstall the drivers too by using USBdeview of course i start all tool as Administrator before . I try to use older versions of Flash Tools but the problem still be the same . After 7 minutes of waiting the Flash Tools show up this message : (BROM ERROR : S_FT_DA_NO_RESPONSE (4001)) "DA didn´t send response data to Flash Tool"

Can someone tell me how to solve this Problem ?

Thank You
and sorry about my English .


Reply
#2
(This post was last modified: 09-12-2015, 11:51 AM by hovatek. )
(09-12-2015, 02:23 AM)Freak Wrote: Hello Members

I have a MTK6582 Smartphone (LEO DG280 from Doogee) after i bought this phone i had some problems with the Touch Screen he not responding anymore. That´s why i take the decision to load the new firmware from the Doogee Homepage after I download it and install the (FLASH TOOL 5.1343.01) and Install the (MediaTek USB VCOM drivers) manually by ignoring the signature i get the (code10 error) if i do ignore this error and start use the Flash Tools (nothing happen) The Phone can´t switch to META mode even if i push the switch off button and the volume up/down button at the same time . The Phone recognize by my computer only as ( MTK USB Port (COMx) I use an Windows 7 64bit Computer and of course i install the 64bit Mediatek Drivers. I restart the computer after install the drivers and i have reinstall the drivers too by using USBdeview of course i start all tool as Administrator before . I try to use older versions of Flash Tools but the problem still be the same . After 7 minutes of waiting the Flash Tools show up this message : (BROM ERROR : S_FT_DA_NO_RESPONSE (4001)) "DA didn´t send response data to Flash Tool"

Can someone tell me how to solve this Problem ?

Thank You
and sorry about my English .

try using another PC and USB cord
ensure the phone is switched off with a charged battery inside when connecting the PC for flashing
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
(This post was last modified: 09-12-2015, 01:27 PM by Freak. )
I try it right now on a my other Computer using in there Windows 7 32bit . After several times of trying now the Smartphone get recognize as (DA USB VCOM Port COMx) without (code10 error) i try to Flash it while have the charged battery inside but the Flash Tools can't detect the Phone/UsbPort to start the progress.

If i unplug/plug the battery it get again recognize as ( MTK USB Port (COMx) if i try to Flash it i get the message : Enable DRAM Failed
Reply
#4
I try to Flash other Firmware right now and after some trying , it get Flashed . wow i'm so Happy . Thank You so much Hovatek for your assist .
Reply










Users browsing this thread:
1 Guest(s)