Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Request to download Innjoo F2 rom backup

#31

It is YJ106E0.img, so what am I to do next?


Reply
#32
(10-08-2015, 01:23 PM)gsmhospital Wrote: It is YJ106E0.img, so what am I to do next?

copy it to the MTK backup folder and rename it to system.img then flash the MTK backup
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#33
I have copied, rename and flash the phone with all the files in the mtkbackup, I even hard reset the phone after flashing it but the phone is still hanging at innjoo logo. I then flash the phone with the files one after the other and hard reset it after flashing but the phone is still hanging at innjoo logo
Reply
#34
(This post was last modified: 10-09-2015, 01:51 PM by hovatek. )
(10-09-2015, 06:45 AM)gsmhospital Wrote: I have copied, rename and flash the phone with  all the files in the mtkbackup, I even hard reset the phone after flashing it but the phone is still hanging at innjoo logo. I then flash the phone with the files one after the other and hard reset it after flashing but the phone is still hanging at innjoo logo

Wipe eMMC in factory mode
Hope you flashed with a formatted SD card in the phone
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#35
No, I did not flash with formated sd card in the phone. I'll do that and let you know how far.

Reply
#36
I have flashed it with formated sd card in the phone and do hard reset on the phone after flashing.The phone still hang at innjoo logo.The phone doesn't enter factory mode, so i couldn't wipe the eMMC. One thing i notice is that after doing the hard reset and i select reboot for the phone to reboot, instead of the phone to reboot, the phone will go off and wouldn't power untill i remove and replace the battery.
Reply
#37
(10-10-2015, 06:54 AM)gsmhospital Wrote: I have flashed it with formated sd card in the phone and do hard reset on the phone after flashing.The phone still hang at innjoo logo.The phone doesn't enter factory mode, so i couldn't wipe the eMMC. One thing i notice is that after doing the hard reset and i select reboot for the phone to reboot, instead of the phone to reboot, the phone will go off and wouldn't power untill i remove and replace the battery.

try re-flashing the other ROM using Wiselink tool again.
if that fails then you just might have to copy more files from the other ROM into the MTK backup and rename them accordingly (just like you did system) before flashing
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#38
(09-16-2015, 09:55 AM)hovatek Wrote:
(09-15-2015, 06:34 PM)gsmhospital Wrote: Hi,
I have an innjoo F2 that hangs at innjoo logo. I have hard rest it with vol up + power button, the hard reset was successful but the phone still didn't boot beyond Innjoo logo.
Please grant me permission to download the innjoo F2 back up to flash the phone. My gmail address is [email protected]
Thank you.

granted! download @ https://forum.hovatek.com/thread-1242.html and flash using Wiselink tool @ https://forum.hovatek.com/thread-5603.html

(09-19-2015, 02:46 PM)hovatek Wrote:
(09-19-2015, 10:19 AM)gsmhospital Wrote: I have done that and am still getting the same error message

download this F2 MTK backup @ https://hovatek.com/redirect.php?link=ht...t=download and extract.
try flashing it using Sp flash tool @ https://forum.hovatek.com/thread-159.html

(09-19-2015, 02:48 PM)satin Wrote:
(09-19-2015, 10:19 AM)gsmhospital Wrote: I have done that and am still getting the same error message

I've used this same firmware on Wiselink tool and it worked fine for me.
maybe you should try another computer

Sent from my itel it1452 using Hovatek mobile

Grant me access to download techno m3 old o.s mtk backup .my email address is [email protected]
Reply
#39
(10-10-2015, 11:05 PM)zombieleet Wrote: Grant me access to download techno m3 old o.s mtk backup .my email address is [email protected]

create a new thread, this is someone else's support thread
see https://forum.hovatek.com/thread-514.html for how to create a thread
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)