Hi, Guest! Login / Register




Thread Rating:
  • 4 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] How to fix an MTK Android phone that wont come on after interrupting SP Flash tool

#61

(04-16-2016, 05:07 AM)Aswin Wrote: Hey...Admin i am using micromax canvas 2 colors,while i was flashing i accidently intrreupt it and the phone was dead. As you have directed i kept it for charging..Its been 2 days but the phone is not switching on.. what to do i'm nervous..plz respond

Take out and reinsert the battery


Reply
#62
Hi Admin...its glad to see that you responded quickly.Yes i Reinserted the battery.but still not switching on.I dnt knw what to do.i'm afraid my phone is gone forever.
Reply
#63
(04-16-2016, 05:00 PM)Aswin Wrote: Hi Admin...its glad to see that you responded quickly.Yes i Reinserted the battery.but still not switching on.I dnt knw what to do.i'm afraid my phone is gone forever.

hold down the power button then connect the phone to a wall charger.
hold for about 2 minutes
Reply
#64
Admin..I tried it but still it is not showing any sign of starting.what to do next.?I'm Nervous
Reply
#65
Hey Admin..I am using micromax canvas 2 colors ..Before 4 days i decided to flash the rom.so i installed Mediatek Vcom drivers Then took sp flash tool i tried to format then i suddenly stopped then phone became dead. I was nervous so i again formated and downladed EBR1 and EBR2 succesfully.But then also phone wont start by pressing power button.So again when start flash it ,it shows
brom error s_ft_enable_dram_fail (5054)
Then i started to charge it till now the phone is not starting.......Plz Help MEE
Reply
#66
(04-18-2016, 05:19 AM)Aswin Wrote: Hey Admin..I am using micromax canvas 2 colors ..Before 4 days i decided to flash the rom.so i installed Mediatek Vcom drivers Then took sp flash tool i tried to format then i suddenly stopped then phone became dead. I was nervous so i again formated and downladed EBR1 and EBR2 succesfully.But then also phone wont start by pressing power button.So again when start flash it ,it shows
brom error s_ft_enable_dram_fail (5054)
Then i started to charge it till now the phone is not starting.......Plz Help MEE

The firmware isn't compatible, try a different firmware
Reply
#67
Admin..2 days ago i had given the phone to Micromax Service centre and they are suggseting me to replace the motherboard of the phone...Is it necessary and it costs a lot...Plz hElp Meee...!!!
Reply
#68
(04-23-2016, 04:14 AM)Aswin Wrote: Admin..2 days ago i had given the phone to Micromax Service centre and they are suggseting me to replace the motherboard of the phone...Is it necessary and it costs a lot...Plz hElp Meee...!!!

depends on whats wrong with the phone
create a new thread so we focus on it
see https://forum.hovatek.com/thread-514.html for how to create a thread
Reply
#69
Could it be this is what's wrong with the Tecno R7 from here? https://forum.hovatek.com/thread-13330-p...l#pid78974 The phone gets warm steadily when I try to power it on but won't switch on
Reply
#70
(06-14-2016, 12:40 PM)Kingsident Wrote: Could it be this is what's wrong with the Tecno R7 from here?  https://forum.hovatek.com/thread-13330-p...l#pid78974 The phone gets warm steadily when I try to power it on but won't switch on

We'll soon upload Tecno R7 variant 2
Reply










Users browsing this thread:
1 Guest(s)