Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 5 Vote(s) - 4.8 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] How to manually install Spreadtrum USB drivers on a Windows PC

#21

(09-27-2015, 12:23 PM)Bibson Wrote: Adb install successful with 4 files copied.
Installing Spreadtrum driver is my challenge.
After following all procedure outline I get The following response :
"The following hardware was not installed :
An error occurred during the installation of the device.
Driver is not intended for this platform.

1. what OS is your PC running on?
2. did you select the correct .inf for your PC


Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#22
(08-06-2015, 03:15 PM)hovatek Wrote:
(08-06-2015, 01:36 PM)Moody2times Wrote: Hello,
I set up adb and followed every step but i didn't see the adb_usb.ini file. I am working on a itel it1701 and using the shortcut master my phone didn't show SET IMEI. So i have been trying to use method two but the Write tool never detects my phone. pls assist

did you install ADB using the guide @ https://forum.hovatek.com/thread-588.html ?

First of all, thanks for the reply. Secondly, sorry for late reply. Finally, Yes, I followed the instructions mathematically. I'm using Windows 8. The Spreadtrum write tool just do not detect my device.
Reply
#23
(09-29-2015, 08:07 PM)Moody2times Wrote: First of all, thanks for the reply. Secondly, sorry for late reply. Finally, Yes, I followed the instructions mathematically. I'm using Windows 8. The Spreadtrum write tool just do not detect my device.

there are other methods to write IMEI to your phone @ https://forum.hovatek.com/thread-664.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#24
(09-30-2015, 09:43 AM)hovatek Wrote:
(09-29-2015, 08:07 PM)Moody2times Wrote: First of all, thanks for the reply. Secondly, sorry for late reply. Finally, Yes, I followed the instructions mathematically. I'm using Windows 8. The Spreadtrum write tool just do not detect my device.

there are other methods to write IMEI to your phone @ https://forum.hovatek.com/thread-664.html

I have successfully followed your instructions with other itel phones. This itel it1701, however, in engineering mode under telephony does not have the SET IMEI command. So, engineering mode is a no go area. I'm saying, I've used all methods already. I'd appreciate any further  assistance. Thanks
Reply
#25
(09-30-2015, 07:21 PM)Moody2times Wrote: I have successfully followed your instructions with other itel phones. This itel it1701, however, in engineering mode under telephony does not have the SET IMEI command. So, engineering mode is a no go area. I'm saying, I've used all methods already. I'd appreciate any further  assistance. Thanks

we'll upgrade the guide @ https://forum.hovatek.com/thread-664.html for your phone type
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#26
(10-01-2015, 11:34 AM)hovatek Wrote:
(09-30-2015, 07:21 PM)Moody2times Wrote: I have successfully followed your instructions with other itel phones. This itel it1701, however, in engineering mode under telephony does not have the SET IMEI command. So, engineering mode is a no go area. I'm saying, I've used all methods already. I'd appreciate any further  assistance. Thanks

we'll upgrade the guide @ https://forum.hovatek.com/thread-664.html for your phone type
Much  appreciated sir  Smile
Reply
#27
(11-12-2014, 02:00 PM)hovatek Wrote: 7. Click Browse... and locate your driver's .inf file is, then select it (Spreadtrum Drivers > SciU2S > x86/x64 for 32bit/64bit PC respectively > driver > SciU2S.inf)

Can't perform this step with my DEPX Ixion E140 (build with SC7731) using Windows XP.
Reply
#28
(01-02-2016, 06:43 AM)John-VEG Wrote: Can't perform this step with my DEPX Ixion E140 (build with SC7731) using Windows XP.

Are you getting an error?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#29
(01-02-2016, 10:40 AM)hovatek Wrote: Are you getting an error?

As if no. See image attached, where "В указанном месте отсутствуют сведения об оборудовании" is written. Which probably means "There aren't any information about the equipment in the place specified".

Attached Files
.png   Screenshot.png (Size: 17.28 KB / Downloads: 7)
Reply
#30
(01-02-2016, 11:31 AM)John-VEG Wrote: As if no. See image attached, where "В указанном месте отсутствуют сведения об оборудовании" is written. Which probably means "There aren't any information about the equipment in the place specified".

Try using a Windows 7 PC
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)