[Tutorial] How to install Unisoc / Spreadtrum SPD USB drivers
[Tutorial] How to install Unisoc / Spreadtrum SPD USB drivers
(27-01-2016, 09:44 AM)uniqueben Followed the steps carefully and got "An error occured during the installation of the device.
Driver is not intended for this platform"
got same response on Windows 10 and 7
Please help!
(27-01-2016, 01:41 PM)hovatek(27-01-2016, 09:44 AM)uniqueben Followed the steps carefully and got "An error occured during the installation of the device.
Driver is not intended for this platform"
got same response on Windows 10 and 7
Please help!
Is your PC 32 or 64 bit?
(27-01-2016, 04:34 PM)uniqueben 32bit
(26-03-2016, 02:17 PM)detyung i have a gtide v7 which i bricked
now it shuts down abnormally due to corrupted file system now it in a bootloop the only thing i see is kingroot has crashed
i have tried flashing a new firmware
but it gets stuck at checking baudrate
could it be a driver issue or what?
(12-11-2014, 02:00 PM)hovatek This guide is for Spreadtrum based (e.g Itel) Android phones
Requirement
* Download Spreadtrum Drivers
* Download SCI Android USB Drivers
* Disable driver signature verification enforcement if using a Windows 8, 8.1 or 10 PC (see https://www.hovatek.com/forum/thread-752.html )
* Setup ADB ( see https://www.hovatek.com/forum/thread-588.html )
* Spreadtrum phone
See the video tutorial below or @ http://youtu.be/bsB_GPbjesQ
Procedure
1. Unzip all downloaded zip files to get their content
2. In Windows, go to Control Panel and open Device Manager
3. Click any of the device groups (any of the items on the list) you see there, then from Action menu at the top, select Add legacy hardware
4. The Add hardware wizard will be launched, click Next
5. Select Install the hardware that I manually select from a list (Advanced) and click Next
6. Click Have Disk...
7. Click Browse... and locate your driver's .inf file is, then select it (Spreadtrum Drivers > SciU2S > x86/x64 for 32bit/64bit PC respectively > driver > SciU2S.inf)
8. Click Open and OK. You will see the drivers listed
9. Select your driver (SCI Android USB2Serial) then click Next
9b. Click Next
10. Click Finish
10b. Your drivers should now appear on the list. Repeat the procedure for Spreadtrum Drivers > google-usb_driver > android_winusb.inf
11. Go to C: / Users/your-user-directory/.android/adb_usb.ini and open with any text editor like notepad or notepad++ (if you can't find the file then download it @ https://www.hovatek.com/forum/attachment.php?aid=1281 and place it in the directory)
12. Add the following on a new line
Code:0x1782
13. Connect the phone to PC without battery inside (switched off is fine if battery is not removable) and Windows will install some additional drivers
(20-07-2016, 09:51 PM)linus abba This is the error message am receiving, when am trying to install the ABD
fastboot