Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 5 Vote(s) - 4.8 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] How to manually install Spreadtrum USB drivers on a Windows PC

#1
(This post was last modified: 12-06-2017, 10:08 AM by hovatek. )

This guide is for Spreadtrum based (e.g Itel) Android phones

Requirements


Note


See the video tutorial below or @ http://youtu.be/bsB_GPbjesQ





Steps to manually install Spreadtrum drivers on a Windows PC


  1. Unzip SCI android usb driver jungo v4 to get its content

  2. Open the SCI-android-usb-driver-jungo-v4 folder > x64 (if you're using a 64 bit PC) or x86 (if you're using a 32 bit PC)

  3. Launch DPInst.exe and follow the driver installation Wizard

  4. Unzip the SciU2S Android USB Spreadtrum Drivers zip file to get its content

    [Image: how-to-install-spreadtrum-spd-usb-drivers-1.jpg]

  5. In Windows, go to Control Panel and open Device Manager 

    [Image: how-to-install-spreadtrum-spd-usb-drivers-2.jpg]

  6. Click any of the device groups (any of the items on the list) you see there, then from Action menu at the top, select Add legacy hardware 

    [Image: how-to-install-spreadtrum-spd-usb-drivers-3.jpg]

  7. The Add hardware wizard will be launched, click Next 

    [Image: how-to-install-spreadtrum-spd-usb-drivers-4.jpg]

  8. Select Install the hardware that I manually select from a list (Advanced) and click Next

    [Image: how-to-install-spreadtrum-spd-usb-drivers-5.jpg]

  9. Click Have Disk... 

    [Image: how-to-install-spreadtrum-spd-usb-drivers-6.jpg]

  10. Click Browse... and locate your driver's .inf file is, then select it (Spreadtrum Drivers > SciU2S > x86/x64 for 32bit/64bit PC respectively > driver > SciU2S.inf)

    [Image: how-to-install-spreadtrum-spd-usb-drivers-7.jpg]

  11. Click Open and OK. You will see the drivers listed

    [Image: how-to-install-spreadtrum-spd-usb-drivers-8.jpg]
     
  12. Select your driver  (SCI Android USB2Serial) then click Next

    [Image: how-to-install-spreadtrum-spd-usb-drivers-81.jpg]

  13. Click Next

    [Image: how-to-install-spreadtrum-spd-usb-drivers-9.jpg]

  14. Click Finish

    [Image: how-to-install-spreadtrum-spd-usb-drivers-10.jpg]

  15. Your drivers should now appear on the list. Repeat the procedure for Spreadtrum Drivers > google-usb_driver > android_winusb.inf

    [Image: how-to-install-spreadtrum-spd-usb-drivers-11.jpg]


  16.  Go to C: / Users/your-user-directory/.android/adb_usb.ini and open with any text editor like  notepad or notepad++  (if you can't find the file then download it @ https://forum.hovatek.com/attachment.php?aid=1281 and place it in the directory)
  17. Add the following on a new line (This is Spreadtrum's USB Vendor ID)

    Code:
    0x1782

  18. Connect the phone to PC without battery inside (switched off is fine if battery is not removable) and Windows will install some additional drivers




Attached Files
.zip   adb_usb.zip (Size: 242 bytes / Downloads: 5,162)
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#2
wooow gud improvement. Bin off for sum while. Skull tynx
Reply
#3
What if I have a working spreadtrum phone eg itel, can't the drivers be automatically installed if I plug the phone to the PC?
Reply
#4
(This post was last modified: 06-04-2015, 05:16 PM by hovatek. )
(06-04-2015, 04:30 PM)mike03 Wrote: What if I have a working spreadtrum phone eg itel, can't the drivers be automatically installed if I plug the phone to the PC?

they can. the C: / Users/your-user-directory/.android/adb_usb.ini editing is still important
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
After downloading the spreadtrum drivers from the link above, the file could not be extracted. I was told that there is no program in my PC that could open it. Please what should I do
Reply
#6
(06-13-2015, 03:48 PM)mike03 Wrote: After downloading the spreadtrum drivers from the link above,  the file could not be extracted. I was told that there is no program in my PC that could open it. Please what should I do

extract using 7zip
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#7
how do i get a pac file for itel it1352 iNote
Reply
#8
(06-24-2015, 07:30 PM)fantasy Wrote: how do i get a pac file for itel it1352 iNote

To get permission to download stock ROMs, please read https://forum.hovatek.com/thread-1326.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#9
Hi. There is no C: / Users/your-user-directory/.android/adb_usb.ini after installing the spreadtrum drivers. please help. thanks.
Reply
#10
(06-30-2015, 06:52 PM)Musembi Wrote: Hi. There is no C: / Users/your-user-directory/.android/adb_usb.ini after installing the spreadtrum drivers. please help. thanks.

thats because you didnt setup adb.
check the requirements above again
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)