[Tutorial] How to bypass pattern, PIN or password on Unisoc / Spreadtrum
[Tutorial] How to bypass pattern, PIN or password on Unisoc / Spreadtrum
(07-08-2016, 07:58 AM)ALBA Please i don't have the PAC file of the spreadtrum phone model..
Model : TL-TEL J3
(08-08-2016, 12:06 PM)ALBA Too maney parttans attempted
(10-08-2016, 07:07 AM)ALBA Only test mode and nothing else ...
Version 4.2.2
(10-08-2016, 10:20 PM)ALBA I used top volume key + power button
(12-11-2014, 09:55 PM)hovatek This guide is for Spreadtrum (e.g Itel) Android phones.
See the video tutorial below or @ https://youtu.be/Qx7mrqRTu5k
Method 1: Unlock using Google account
* If the Android device is associated with a Google account then simply supply your credentials to regain access.
* If mobile network data isn't enabled then you can use WIFI.
Method 2: Recovery mode
* Boot into recovery mode (see https://www.hovatek.com/forum/thread-2167.html )
* Select Wipe data / factory reset
* Select Yes to confirm
* Reboot the phone
Method 3: Pattern / PIN Bypass
* Enable ADB communicate with the phone (see https://www.hovatek.com/forum/thread-2137.html )
* Boot the phone into Spreadtrum Test mode (Power + Volume up)
* Connect the phone to PC via USB cord
* In adb, type the following and press enter after each command
Code:adb devices
adb shell
cd data/system
rm *.key
* Now, remove the battery then boot the phone.
* If presented with a lock screen, just enter any pattern or pin and you'll be granted access
Method 4: Fastboot
* Setup ADB and Fastboot on the PC as mentioned above
* Boot the phone to the pattern screen
* Connect the phone to PC via USB cord
* Boot the phone into Fastboot mode using the following commands in adb (press Enter after each)
* In fastboot, run the following commandCode:adb devices
adb reboot bootloader
* Setup the phone like when newCode:fastboot devices
fastboot erase userdata
fastboot erase cache
fastboot reboot
Method 5: Stock ROM flashing
If all the above fail then download the pac file @ https://www.hovatek.com/forum/forum-89.html and flash fdl 1&2 and userdata using Research Download tool @ https://www.hovatek.com/forum/thread-1231.html
(19-09-2017, 08:23 AM)losilmalem Hello Hovatek! :-) Please! For this to be possible to be done (I mean to send adb commands), does the phone need to be rooted first so that they work and perform what's right?