Hi, Guest! Login / Register




Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] How to flash Clockworkmod (CWM) or TWRP recovery to an Itel phone

#41

(07-21-2016, 12:46 AM)damafeez Wrote: Hello ien01. I tried flashing cwm recovery img I downloaded here to my itel 1505 but it neva boots into recovery after flashing it. It just shows a blank black screen when I try booting into recovery. U knw?... I thought it was nothing  until I tried restoring factory settings on it recently and it sends me to that black screen when it tries to reboot. I believe it should just get back to normal when I flash the stock recovery back on it and  ,unfortunately, I didn't back mine up(my mistake) So can I get yours please?

create a new thread so we focus on this
see https://forum.hovatek.com/thread-514.html for how to create a thread


Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#42
Pls am in need of cwm for itel 1702 lollipop
Reply
#43
(08-11-2016, 01:50 PM)Chyslar Wrote: Pls am in need of cwm for itel 1702 lollipop

Do you have the stock recovery.img?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#44
(09-23-2015, 12:29 PM)hovatek Wrote: Method 1: Flashify apk

* Root the phone
* Download Flashify @ https://hovatek.com/redirect.php?link=ht...hify&hl=en
* Flash the recovery image using Flashify

Method 2: Fastboot

Requirements

* Setup ADB to detect your Itel (Spreadtrum) Android phone using https://forum.hovatek.com/thread-2137.html
* Download the Clockworkmod (CWM) recovery image for your phone model below

Procedure

* Copy the Clockworkmod recovery image into the same folder where adb.exe and fastboot.exe are
* Launch ADB and run the following commands (press Enter after each command)

Code:
adb devices
adb reboot bootloader

* The phone should enter Fastboot mode (Black screen with fastboot written at the top or bottom)
* In fastboot, run the following commands (ensure to press Enter after each command)
Code:
fastboot devices
fastboot flash recovery recovery.img
fastboot reboot

* Once the phone reboots, switch it off and reboot into recovery mode to confirm that flashing was successful. 

How do I boot an Itel Android phone into recovery mode?

Follow the guide @ https://forum.hovatek.com/thread-2167.html to boot into recovery mode on an Itel phone

You should have something like this

[Image: Hovatek-Clockworkmod-recovery-6-for-Itel...atek-2.jpg]

Collection of Clockworkmod & TWRP recovery images for Itel phones

Itel 1405 CWM 6 recovery image
https://hovatek.com/redirect.php?link=ht...t=download

Itel 1407 CWM 6 recovery image
https://hovatek.com/redirect.php?link=ht...BLaVE/view

Itel 1452 CWM 6 recovery image
https://hovatek.com/redirect.php?link=ht...t=download

Itel 1453 CWM 6 recovery image
https://hovatek.com/redirect.php?link=ht...t=download

Itel 1502 CWM 6 recovery image
https://hovatek.com/redirect.php?link=ht...t=download

Itel 1503 CWM 6 recovery image
https://hovatek.com/redirect.php?link=ht...t=download

Itel 1505 TWRP V2.8.5.0
https://hovatek.com/redirect.php?link=ht...t=download

Itel 1506 TWRP V2.8.5.0
https://hovatek.com/redirect.php?link=ht...t=download

Itel 1701 CWM 6 recovery image
https://hovatek.com/redirect.php?link=ht...t=download
Reply
#45
I did download extract and flash itel 1407 with the recovery downloaded from the thread but after trying to boot recovery only itel logo was seen and cwm didn't show up. then I flash back stock recovery from my back up which is working. What get wrong and how do I fix it
Reply
#46
(11-11-2016, 11:08 AM)Drilla talentzz Wrote: I did download extract and flash itel 1407 with the recovery downloaded from the thread but after trying to boot recovery only itel logo was seen and cwm didn't show up. then I flash back stock recovery from my back up which is working. What get wrong and how do I fix it

Yours must be a different variant.
we'll have to port for it
1. Whats the build number of your phone
2. Upload the stock recovery and post the link here
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#47
(09-23-2015, 12:29 PM)hovatek Wrote: Method 1: Flashify apk

* Root the phone
* Download Flashify @ https://hovatek.com/redirect.php?link=ht...hify&hl=en
* Flash the recovery image using Flashify

Method 2: Fastboot

Requirements

* Setup ADB to detect your Itel (Spreadtrum) Android phone using https://forum.hovatek.com/thread-2137.html
* Download the Clockworkmod (CWM) recovery image for your phone model below

Procedure

* Copy the Clockworkmod recovery image into the same folder where adb.exe and fastboot.exe are
* Launch ADB and run the following commands (press Enter after each command)

Code:
adb devices
adb reboot bootloader

* The phone should enter Fastboot mode (Black screen with fastboot written at the top or bottom)
* In fastboot, run the following commands (ensure to press Enter after each command)
Code:
fastboot devices
fastboot flash recovery recovery.img
fastboot reboot

* Once the phone reboots, switch it off and reboot into recovery mode to confirm that flashing was successful. 

How do I boot an Itel Android phone into recovery mode?

Follow the guide @ https://forum.hovatek.com/thread-2167.html to boot into recovery mode on an Itel phone

You should have something like this

[Image: Hovatek-Clockworkmod-recovery-6-for-Itel...atek-2.jpg]

Collection of Clockworkmod & TWRP recovery images for Itel phones

Itel 1405 CWM 6 recovery image
https://hovatek.com/redirect.php?link=ht...t=download

Itel 1407 CWM 6 recovery image
https://hovatek.com/redirect.php?link=ht...BLaVE/view

Itel 1452 CWM 6 recovery image
https://hovatek.com/redirect.php?link=ht...t=download

Itel 1453 CWM 6 recovery image
https://hovatek.com/redirect.php?link=ht...t=download

Itel 1502 CWM 6 recovery image
https://hovatek.com/redirect.php?link=ht...t=download

Itel 1503 CWM 6 recovery image
https://hovatek.com/redirect.php?link=ht...t=download

Itel 1505 TWRP V2.8.5.0
https://hovatek.com/redirect.php?link=ht...t=download

Itel 1506 TWRP V2.8.5.0
https://hovatek.com/redirect.php?link=ht...t=download

Itel 1701 CWM 6 recovery image
https://hovatek.com/redirect.php?link=ht...t=download
Reply
#48
My itel 1407 build num is "IT1407-w403-20151228" running KitKat and I av uploaded the stock recovery to Google drive. here is the link

https://drive.google.com/file/d/0B9kpgbG...p=drivesdk

Reply
#49
(11-14-2016, 11:03 AM)Drilla talentzz Wrote: My itel 1407 build num is "IT1407-w403-20151228" running KitKat and I av uploaded the stock recovery to Google drive. here is the link

https://drive.google.com/file/d/0B9kpgbG...p=drivesdk

Was this recovery extracted from your phone? If yes, how?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#50
I extracted it using flashify but don't worry. I managed already to port TWRP to this device and its working.. Thanks for your help
Reply










Users browsing this thread:
1 Guest(s)