Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

tecno m7 wahala

#1
Thumbs Up 

good day y'all.. i have a problem with my tecno m7, its refusing to boot past the TECNO sign on startup. ive done the cache wiping and done a full reset and its still not better. pls what do i do to get it working again. thanks


Reply
#2
(09-24-2015, 02:21 PM)narcissisticmel Wrote: good day y'all.. i have a problem with my tecno m7, its refusing to boot past the TECNO sign on startup. ive done the cache wiping and done a full reset and its still not better. pls what do i do to get it working again. thanks

1. how did this start?
2. supply a gmail address
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
(09-24-2015, 08:12 PM)hovatek Wrote:
(09-24-2015, 02:21 PM)narcissisticmel Wrote: good day y'all.. i have a problem with my tecno m7, its refusing to boot past the TECNO sign on startup. ive done the cache wiping and done a full reset and its still not better. pls what do i do to get it working again. thanks

1. how did this start?
2. supply a gmail address

The battery died and when I tried charging it, it just showed the Z in the battery and wasn't adding power to the battery. Instead of it to actually start charging, it will just stay on that Z battery low charging display forever. Then I got another battery and it came in but didn't boot past the Tecno logo on start up. That's when I did a cache wipe and a reset but still the same thing. 
[email protected]
Reply
#4
(09-24-2015, 09:34 PM)narcissisticmel Wrote: The battery died and when I tried charging it, it just showed the Z in the battery and wasn't adding power to the battery. Instead of it to actually start charging, it will just stay on that Z battery low charging display forever. Then I got another battery and it came in but didn't boot past the Tecno logo on start up. That's when I did a cache wipe and a reset but still the same thing. 
[email protected]

granted! download @ https://forum.hovatek.com/thread-311.html and flash using Sp flash tool @ https://forum.hovatek.com/thread-159.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
Help me pls. I installed a wrong rom to my tecno f5 Comfort rom to be precise. ..I didnt know the rom is only for infinix. Now when I on my phone nothing shows it just shows light and keep rebooting... The main problem is that I cant enter recovery mode to try a new rom. If I hold power button n volume down. It just comes on  n shows just d light. Looks like that comfort rom removed my recovery mode... Pls Help is it possible to Flash a recovery img or a new rom in this situation.... Helppp!!! Now it worse it not coming on. If u plug d charger it won't do as if light entered it at all.. Helllp pls

Sent from my Infinix X507 using Hovatek mobile
Reply
#6
(09-25-2015, 08:13 AM)hovatek Wrote: r narcissisticmelThe battery died and when I tried charging it, it just showed the Z in the battery and wasn't adding power to the battery. Instead of it to actually start charging, it will just stay on that Z battery low charging display forever. Then I got another battery and it came in but didn't boot past the Tecno logo on start up. That's when I did a cache wipe and a reset but still the same thing. 
[email protected]

granted! download @ https://forum.hovatek.com/thread-311.html and flash using Sp flash tool @ https://forum.hovatek.com/thread-159.html

Thanks for your assistance. I'd try that now and give a feed back. Thank you
Reply
#7
(09-25-2015, 09:10 AM)narcissisticmel Wrote:
(09-25-2015, 08:13 AM)hovatek Wrote: r narcissisticmelThe battery died and when I tried charging it, it just showed the Z in the battery and wasn't adding power to the battery. Instead of it to actually start charging, it will just stay on that Z battery low charging display forever. Then I got another battery and it came in but didn't boot past the Tecno logo on start up. That's when I did a cache wipe and a reset but still the same thing. 
[email protected]

granted! download @ https://forum.hovatek.com/thread-311.html and flash using Sp flash tool @ https://forum.hovatek.com/thread-159.html

Thanks for your assistance. I'd try that now and give a feed back. Thank you
After downloading the mtk tools and sp flash tool. What next? I'd need step by step guidance so I don't make silly mistakes as this is a new procedure to me. Thank you so much for your assistance
Reply
#8
(09-25-2015, 10:50 AM)narcissisticmel Wrote: After downloading the mtk tools and sp flash tool. What next? I'd need step by step guidance so I don't make silly mistakes as this is a new procedure to me. Thank you so much for your assistance

the Sp flash tool guide and video already explain it all. just follow them
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#9
(09-25-2015, 12:13 PM)hovatek Wrote:
(09-25-2015, 10:50 AM)narcissisticmel Wrote: After downloading the mtk tools and sp flash tool. What next? I'd need step by step guidance so I don't make silly mistakes as this is a new procedure to me. Thank you so much for your assistance

the Sp flash tool guide and video already explain it all. just follow them

Ok... thank you
Reply
#10
(09-25-2015, 12:13 PM)hovatek Wrote:
(09-25-2015, 10:50 AM)narcissisticmel Wrote: After downloading the mtk tools and sp flash tool. What next? I'd need step by step guidance so I don't make silly mistakes as this is a new procedure to me. Thank you so much for your assistance

the Sp flash tool guide and video already explain it all. just follow them

ok.. ive done the flash but its still booting to just Tecno, i removed the battery and did a wipe/factory reset and it showed --wiping data... Mount/data error. what do i do pls?
Reply










Users browsing this thread:
1 Guest(s)