Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

How to fix a dead huawei y600 android phone

#1
Sad 

i have this phone huawei y600-u20 and is totally dead. it wont charge and see the icon or power it on. it will just vibrates and no more.

i formatted it using sp flash tool. it is said "ok" and so i close the sp flash tool and disconnect the cable from the computer. when i start to turn it, it wont. i tried to charge it using computer and still not.
how can i fix this? please help me.
Sad


Reply
#2
(09-26-2015, 08:47 AM)jogie1991joko1991 Wrote: i have this phone huawei y600-u20 and is totally dead. it wont charge and see the icon or power it on. it will just vibrates and no more.

i formatted it using sp flash tool. it is said "ok" and so i close the sp flash tool and disconnect the cable from the computer. when i start to turn it, it wont. i tried to charge it using computer and still not.
how can i fix this? please help me.
Sad

of course your phone will stay dead. you formatted without flashing any rom to it.
if you have the stock ROM, flash it using SP flash tool @ https://forum.hovatek.com/thread-159.html
Reply
#3
(09-26-2015, 10:11 AM)hovatek Wrote:
(09-26-2015, 08:47 AM)jogie1991joko1991 Wrote: i have this phone huawei y600-u20 and is totally dead. it wont charge and see the icon or power it on. it will just vibrates and no more.

i formatted it using sp flash tool. it is said "ok" and so i close the sp flash tool and disconnect the cable from the computer. when i start to turn it, it wont. i tried to charge it using computer and still not.
how can i fix this? please help me.
Sad

of course your phone will stay dead. you formatted without flashing any rom to it.
if you have the stock ROM, flash it using SP flash tool @ https://forum.hovatek.com/thread-159.html

do i still need an SD card? dont have any extra sd cards and my neighboors are too boast.
Reply
#4
(09-26-2015, 12:14 PM)jogie1991joko1991 Wrote:
(09-26-2015, 10:11 AM)hovatek Wrote:
(09-26-2015, 08:47 AM)jogie1991joko1991 Wrote: i have this phone huawei y600-u20 and is totally dead. it wont charge and see the icon or power it on. it will just vibrates and no more.

i formatted it using sp flash tool. it is said "ok" and so i close the sp flash tool and disconnect the cable from the computer. when i start to turn it, it wont. i tried to charge it using computer and still not.
how can i fix this? please help me.
Sad

of course your phone will stay dead. you formatted without flashing any rom to it.
if you have the stock ROM, flash it using SP flash tool @ https://forum.hovatek.com/thread-159.html

do i still need an SD card? dont have any extra sd cards and my neighboors are too boast.

i mean, is an SD CARD is also a requirements? or in need of flashing a ROM? or is it that so necessary to have an SD CARD built in before flashing?
Reply
#5
(This post was last modified: 09-26-2015, 12:32 PM by X3non. )
(09-26-2015, 12:17 PM)jogie1991joko1991 Wrote: i mean, is an SD CARD is also a requirements? or in need of flashing a ROM? or is it that so necessary to have an SD CARD built in before flashing?

For now, you just need
a pc
the dead phone
and good USB cord

download stock rom for huawei y600-u20 here
flash using spft
Reply
#6
(09-26-2015, 12:31 PM)X3non Wrote:
(09-26-2015, 12:17 PM)jogie1991joko1991 Wrote: i mean, is an SD CARD is also a requirements? or in need of flashing a ROM? or is it that so necessary to have an SD CARD built in before flashing?

For now, you just need
a pc
the dead phone
and good USB cord

download stock rom for huawei y600-u20 here
flash using spft

i already downloaded that firmware and another firmware from newrom.com but when i flash it with spft v5.1352, it goes ERROR 5054 which is dram failed.
i tried v3.1328, and still error, no path it says.
im totally confused.
:\
Reply
#7
needrom rather
Reply
#8
(09-26-2015, 12:49 PM)jogie1991joko1991 Wrote: i already downloaded that firmware and another firmware from newrom.com but when i flash it with spft v5.1352, it goes ERROR 5054 which is dram failed.
i tried v3.1328, and still error, no path it says.
im totally confused.
:\

post a screenshot of the error message.
and are you certain the ROM is for your exact model?
Reply
#9
(09-26-2015, 02:56 PM)hovatek Wrote:
(09-26-2015, 12:49 PM)jogie1991joko1991 Wrote: i already downloaded that firmware and another firmware from newrom.com but when i flash it with spft v5.1352, it goes ERROR 5054 which is dram failed.
i tried v3.1328, and still error, no path it says.
im totally confused.
:\

post a screenshot of the error message.
and are you certain the ROM is for your exact model?

Thank you xenon, thank you hovatek. I already make my smartphone come back with the aid of your forums and blogs about flashing. Smile
Reply
#10
(09-27-2015, 06:16 AM)jogie1991joko1991 Wrote:
(09-26-2015, 02:56 PM)hovatek Wrote:
(09-26-2015, 12:49 PM)jogie1991joko1991 Wrote: i already downloaded that firmware and another firmware from newrom.com but when i flash it with spft v5.1352, it goes ERROR 5054 which is dram failed.
i tried v3.1328, and still error, no path it says.
im totally confused.
:\

post a screenshot of the error message.
and are you certain the ROM is for your exact model?

Thank you xenon, thank you hovatek. I already make my smartphone come back with the aid of your forums and blogs about flashing. Smile

Hi, I have the same issue. How did you solve the problem?
Reply










Users browsing this thread:
1 Guest(s)