Flashing UMI X2 with SP Flash tool
Flashing UMI X2 with SP Flash tool
(19-11-2014, 08:38 AM)slasanka@gmail.com Please help me with this problem
hovatslasanka@gmail.com Please help me with this problem
1. The ROM you're trying to flash, is it for your exact phone model?
2. You might be having as EMMC issue although a corrupt OS isn't ruled out
3. What version of SP flash tool are you using?
slasanka@gmail.co 1. Yes it is exact ROM mentions according to needrom.comhope you know that just because a ROM is an MT6582 ROM and your phone also happens to be an MT6582 phone doesnt mean the ROM is for your exact phone. Please, crosscheck to be sure its for your exact model because your phone could get worse if we flash the wrong files. once you confirm this, we will proceed
2. I dont really know whats mean EMMC issue
3. Im using ( " SP_Flash_Tool_v3.1222.00 MASTERBOX GIFT " ) of version.
slasanka@gmail.co My device is UMI X2 and it is with MT6589 and i download rom from here ( http://www.needrom.com/category/umi/umi-x2/) so i think all ROM's are below this link exact for my kind device ( UMI X2 ) . so can you tell me please what may cause the problem to stop download end of the 100% red bar and not coming to yellow bar.download Sp flash tool version 5 @ http://www.hovatek.com/forum/thread-159.html > install USB deview and remove all Vcom, Mediatek and preloader drivers > Manually install vcom drivers using this guide @ http://www.hovatek.com/forum/thread-440.html > try flashing the files again
slasanka@gmail.co download Sp flash tool version 5 @ http://www.hovatek.com/forum/thread-159.html > install USB deview and remove all Vcom, Mediatek and preloader drivers > Manually install vcom drivers using this guide @ http://www.hovatek.com/forum/thread-440.html > try flashing the files again
(21-11-2014, 10:39 AM)slasanka@gmail.com.slasanka@gmail.co download Sp flash tool version 5 @ http://www.hovatek.com/forum/thread-159.html > install USB deview and remove all Vcom, Mediatek and preloader drivers > Manually install vcom drivers using this guide @ http://www.hovatek.com/forum/thread-440.html > try flashing the files again
I tried with SP Flash 5 but when it fill red progress bar to 100% and pop up message flash_tool.exe has stopped working . and nothing happen
whether after or before install the V-com drivers when i connect device to pc , it get connected and disconnect about after 25-30 sec and right after reconnect withing 2 sec and aging disconnect about after 25-30 sec and this happen repeatedly as long as connect the device to PC. and best part is there is procedure device must connect after hit the download button on the SP flash tool and after hit download and connect the device run the red progress bar and stop but device not disconnect as long as connect the USB cord.
* there is no option to chose USB mode in SP flash tool v5
* I agin tried with SP flash tool v3
* I also try with DA DL All with check sum
Is this a problem with V-com drivers ?
Here are few images Device manager before connect device and after connect device and when SP flash tool get error message
1. Device manager before connect device
2. Device manager after connect device
3. SP flash tool v5 getting error message