Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Please help tecno p5+ does not boot

#1

I wanted to install CWM using flash tool, it got stuck in the middle of the process error from flash tool, I don't know why

It does not boot now, only detects as mediatek preloaded vcom at device manager





Please I need HELPHuh


Reply
#2
(This post was last modified: 09-29-2015, 06:33 PM by hovatek. )
(09-29-2015, 04:58 PM)droidmobitech Wrote: I wanted to install CWM using flash tool, it got stuck in the middle of the process error from flash tool, I don't know why

It does not boot now, only detects as mediatek preloaded vcom at device manager





Please I need HELPHuh

if you interrupted flashing then follow the guide @ https://forum.hovatek.com/thread-808.html
supply a gmail address for the stock backup
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: technical@hovatek.com
* Skype: Hovatek
Reply
#3
I have followed your guide well, it seems to power on now with only tecno logo

It does boot pass it. I cannot get to factory test mode nor recovery mode, I don't know whether some boot sectors have been formated


Please may be a stock rom will be helpful Huh

Thanks in Advance


Gmail
droidmobitech@gmail.com
Reply
#4
(09-30-2015, 04:37 AM)droidmobitech Wrote: I have followed your guide well, it seems to power on now with only tecno logo

It does boot pass it. I cannot get to factory test mode nor recovery mode, I don't know whether some boot sectors have been formated


Please may be a stock rom will be helpful Huh

Thanks in Advance


Gmail
droidmobitech@gmail.com

if a factory reset in recovery mode doesn't help then use the stock backup
granted! download @ https://forum.hovatek.com/thread-311.html and flash recovery.img using Sp flash tool @ https://forum.hovatek.com/thread-159.html
Need further assistance? Speak with a Hovatek Representative:

Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)

Request for Private Support
* Install the Hovatek Forum app
* Listen to H-Tech Radio
* Helpline: +2348021840309
* Email: technical@hovatek.com
* Skype: Hovatek
Reply
#5
Thanks


Successful flash to stock firmware [MTK BACKUP TO FLASHTOOL]  prepared




Everything works perfectly well Big Grin Big Grin


Thanks so much

I keep this firmware safe for future use.....
Reply










Users browsing this thread:
1 Guest(s)