Hi, Guest! Login / Register




Thread Rating:
  • 5 Vote(s) - 4.6 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] How to unbrick / fix a bricked Tecno phone (stuck at Tecno boot logo / image)


(06-12-2016, 11:00 PM)AtomAdeyemi Wrote: I am having issues with my infinix phone connecting to my PC.
It doesn't respond at all..
I tried solving the issue by installing a custom ROM but got worse.
Stucked at boot logo.
I got a phone of the same model and did a backup of its stock ROM using Philz Recovery.
I copied the clockworkmod backup to an SD card and inserted the card to my phone.
Booted to recovery....the recovery installed was CWM.
I tried restoring backup but it won't complete.
Is the fault related to the diffsrence in recovery?
Or something else.
Please.


07032429205

create a new thread

see https://forum.hovatek.com/thread-514.html for how to create a thread


Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
(01-31-2014, 08:13 AM)waltybravia Wrote:
(01-30-2014, 06:41 AM)ckross Wrote:
(01-23-2014, 08:21 PM)hovatek Wrote: Get a working phone of the same type as the bricked one and back it up using mtk droid tools; you'll find boot.img inside the backup folder or you could use partiton manager to dump a boot image to the SD card of the working phone

gud thought bros

dnt knw wat i did wrng bt i've succexfully added more damages 2 d fone. Nw when i connect d bricked fone to my PC, it displays a dark blue colour i.e d mtk droid tools app. Nd it reports dat my fne is unknwn, no data at all, nd says ROM error. Any way out?

Please o bros, mine is a different problem. My tecno R7 got hot in my pocket so I noticed. Then I removed its battery and let it cool down, after awhile I put the battery back in then switch it on. Now the phone instead of booting will show the tecno logo for some time then it will off again repeating the same cycle over and over again. I can't enter recovery so I assume it's a software problem so I flashed the phone with its stock rom using sp flash tool it was successful but to my amazement the phone still gives the same problem. Please what should I do? Could this be a hardware problem?
Reply
(08-29-2016, 02:08 AM)Fayrouz Wrote: Please o bros, mine is a different problem. My tecno R7 got hot in my pocket so I noticed. Then I removed its battery and let it cool down, after awhile I put the battery back in then switch it on. Now the phone instead of booting will show the tecno logo for some time then it will off again repeating the same cycle over and over again. I can't enter recovery so I assume it's a software problem so I flashed the phone with its stock rom using sp flash tool it was successful but to my amazement the phone still gives the same problem. Please what should I do? Could this be a hardware problem?

Very likely
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
(08-29-2016, 04:20 PM)hovatek Wrote:
(08-29-2016, 02:08 AM)Fayrouz Wrote: Please o bros, mine is a different problem. My tecno R7 got hot in my pocket so I noticed. Then I removed its battery and let it cool down, after awhile I put the battery back in then switch it on. Now the phone instead of booting will show the tecno logo for some time then it will off again repeating the same cycle over and over again. I can't enter recovery so I assume it's a software problem so I flashed the phone with its stock rom using sp flash tool it was successful but to my amazement the phone still gives the same problem. Please what should I do? Could this be a hardware problem?

Very likely

Please what would you suggest I do now?
Reply
(This post was last modified: 09-01-2016, 04:22 PM by hovatek. )
(09-01-2016, 12:42 AM)Fayrouz Wrote: Please what would you suggest I do now?

Boot into factory mode (vol down + power) and clear emmc

Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
(09-01-2016, 04:21 PM)hovatek Wrote:
(09-01-2016, 12:42 AM)Fayrouz Wrote: Please what would you suggest I do now?

Boot into factory mode (vol down + power) and clear emmc

But it won't boot into recovery. it keeps going on and off
Reply
(09-03-2016, 12:29 AM)Fayrouz Wrote: But it won't boot into recovery. it keeps going on and off

create a new thread so we focus on this
see https://forum.hovatek.com/thread-514.html for how to create a thread
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
I am hopping you guys can help me to unbrick my Lenovo K5 Note, I was using my pc to install a custom rom and the power shoot down `interrupting the installation

Pressing the Volume up and power doesn't do anything on the phone
When I plug it to the computer it turns on the red light in the front as well when pluging it to the power cord
But MTK and SPFlash do not recognize it
I have updated the drivers when plugged in to hte PC I can see the MEDia tek USB COM ( Andorid ) (CM10)
I dont know what else to do
Can you help me?

Thanks in advance
Reply
(11-09-2016, 05:46 PM)fabiorhernandez Wrote: I am hopping you guys can help me to unbrick my Lenovo K5 Note, I was using my pc to install a custom rom and the power shoot down `interrupting the installation

Pressing the Volume up and power doesn't do anything on the phone
When I plug it to the computer it turns on the red light in the front as well when pluging it to the power cord
But MTK and SPFlash do not recognize it
I have updated the drivers when plugged in to hte PC I can see the MEDia tek USB COM ( Andorid ) (CM10)
I dont know what else to do
Can you help me?

Thanks in advance

Create a new thread so we focus on this
see https://forum.hovatek.com/thread-514.html for how to create a thread
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
Hi hovatek,
I started experiencing this two weeks ago.
The problem with my fero v501 started while using my playstore and suddenly it started misbehaving with 'Unfortunately ...has stopped' it just keeps poping out .. then i tried to format it but to no avail..i meant everything in the same state as if i never formatted it.
i even hard reset it...still the same. i switched it off
The second day switched it on ,it dosent pass the logo screen. just hangs there.
please help. Software problem i guess
it just worsening.
Thanks in anticipation

Sent from my TECNO-H3 using Hovatek Forum mobile app
Reply










Users browsing this thread:
1 Guest(s)