Hi, Guest! Login / Register




Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] How to use Infinix Flash Tool

#11

(10-08-2015, 09:11 PM)hovatek Wrote: Requirements

* PC
* Phone
* Download Infinix Flash Tool @ https://hovatek.com/redirect.php?link=ht...t=download
* Download the Stock ROM for your phone model @ https://forum.hovatek.com/thread-533.html
* Install VCOM drivers on the PC using https://forum.hovatek.com/thread-440.html

See the video tutorial below or @ http://youtu.be/wIjc4_gcFSM






Procedure

1. Extract Infinix Flash tool and the stock ROM you wish to flash

[Image: how-to-use-infinix-flash-tool-1.jpg]

2. Run Infinix Flash tool as Administrator

[Image: how-to-use-infinix-flash-tool-2.jpg]

3. You should now see the tool's Dashboard

[Image: how-to-use-infinix-flash-tool-3.jpg]

4. Click Brower (with a folder icon)

[Image: how-to-use-infinix-flash-tool-4.jpg]

5. In the window that pops up, navigate to the stock ROM folder, select the scatter file and click Open

[Image: how-to-use-infinix-flash-tool-5.jpg]

6. The file path should now appear in front of Infinix-bin-loading File

[Image: how-to-use-infinix-flash-tool-5b.jpg]

7. Click Start

[Image: how-to-use-infinix-flash-tool-6.jpg]

8. Start should now be grayed out and Stop green in color

[Image: how-to-use-infinix-flash-tool-7.jpg]

9. Switch off the phone and connect it to the PC via USB cord (with battery inside); flashing should begin
* Note: Do not interrupt flashing. If you accidentally do and the phone goes dead then follow the guide @ https://forum.hovatek.com/thread-808.html

[Image: how-to-use-infinix-flash-tool-8.jpg]

10. You should get a green OK prompt once flashing is completed

[Image: how-to-use-infinix-flash-tool-9.jpg]

11. Disconnect the phone then boot it. If the phone gets stuck at logo (and you flashed the correct ROM) then removed the battery and slot it back in. If the battery is inbuilt then do a factory reset in recovery mode.
thankyou so much this is greeeeeeaaaaaatt!!!!


Reply
#12
(10-08-2015, 09:11 PM)hovatek Wrote: Requirements

* PC
* Phone
* Download Infinix Flash Tool @ https://hovatek.com/redirect.php?link=ht...t=download
* Download the Stock ROM for your phone model @ https://forum.hovatek.com/thread-533.html
* Install VCOM drivers on the PC using https://forum.hovatek.com/thread-440.html

See the video tutorial below or @ http://youtu.be/wIjc4_gcFSM






Procedure

1. Extract Infinix Flash tool and the stock ROM you wish to flash

[Image: how-to-use-infinix-flash-tool-1.jpg]

2. Run Infinix Flash tool as Administrator

[Image: how-to-use-infinix-flash-tool-2.jpg]

3. You should now see the tool's Dashboard

[Image: how-to-use-infinix-flash-tool-3.jpg]

4. Click Brower (with a folder icon)

[Image: how-to-use-infinix-flash-tool-4.jpg]

5. In the window that pops up, navigate to the stock ROM folder, select the scatter file and click Open

[Image: how-to-use-infinix-flash-tool-5.jpg]

6. The file path should now appear in front of Infinix-bin-loading File

[Image: how-to-use-infinix-flash-tool-5b.jpg]

7. Click Start

[Image: how-to-use-infinix-flash-tool-6.jpg]

8. Start should now be grayed out and Stop green in color

[Image: how-to-use-infinix-flash-tool-7.jpg]

9. Switch off the phone and connect it to the PC via USB cord (with battery inside); flashing should begin
* Note: Do not interrupt flashing. If you accidentally do and the phone goes dead then follow the guide @ https://forum.hovatek.com/thread-808.html

[Image: how-to-use-infinix-flash-tool-8.jpg]

10. You should get a green OK prompt once flashing is completed

[Image: how-to-use-infinix-flash-tool-9.jpg]

11. Disconnect the phone then boot it. If the phone gets stuck at logo (and you flashed the correct ROM) then removed the battery and slot it back in. If the battery is inbuilt then do a factory reset in recovery mode.


PLS HELP!!!

with this infinix flash tool update, can i use it to flash my DEAD TECNO P5 ROM?
Reply
#13
(08-08-2016, 05:38 PM)emmynoni Wrote: PLS HELP!!!

with this infinix flash tool update, can i use it to flash my DEAD TECNO P5 ROM?

create a new thread so we focus on it
see https://forum.hovatek.com/thread-514.html for how to create a thread
Reply
#14
(10-08-2015, 09:11 PM)hovatek Wrote: Requirements

* PC
* Phone
* Download Infinix Flash Tool @ https://forum.hovatek.com/thread-15540.html
* Download the Stock ROM for your phone model @ https://forum.hovatek.com/thread-533.html
* Install VCOM drivers on the PC using https://forum.hovatek.com/thread-440.html

See the video tutorial below or @ http://youtu.be/wIjc4_gcFSM






Procedure

1. Extract Infinix Flash tool and the stock ROM you wish to flash

[Image: how-to-use-infinix-flash-tool-1.jpg]

2. Run Infinix Flash tool as Administrator

[Image: how-to-use-infinix-flash-tool-2.jpg]

3. You should now see the tool's Dashboard

[Image: how-to-use-infinix-flash-tool-3.jpg]

4. Click Brower (with a folder icon)

[Image: how-to-use-infinix-flash-tool-4.jpg]

5. In the window that pops up, navigate to the stock ROM folder, select the scatter file and click Open

[Image: how-to-use-infinix-flash-tool-5.jpg]

6. The file path should now appear in front of Infinix-bin-loading File

[Image: how-to-use-infinix-flash-tool-5b.jpg]

7. Click Start

[Image: how-to-use-infinix-flash-tool-6.jpg]

8. Start should now be grayed out and Stop green in color

[Image: how-to-use-infinix-flash-tool-7.jpg]

9. Switch off the phone and connect it to the PC via USB cord (with battery inside); flashing should begin
* Note: Do not interrupt flashing. If you accidentally do and the phone goes dead then follow the guide @ https://forum.hovatek.com/thread-808.html

[Image: how-to-use-infinix-flash-tool-8.jpg]

10. You should get a green OK prompt once flashing is completed

[Image: how-to-use-infinix-flash-tool-9.jpg]

11. Disconnect the phone then boot it. If the phone gets stuck at logo (and you flashed the correct ROM) then removed the battery and slot it back in. If the battery is inbuilt then do a factory reset in recovery mode.

hey, When I load the scatter txt file .. it is showed to me this message !! .. What does that mean ?!

Attached Files
.png   Untitled.png (Size: 7.86 KB / Downloads: 9)
Reply
#15
(01-16-2017, 01:38 AM)yewess97 Wrote: hey, When I load the scatter txt file .. it is showed to me this message !! .. What does that mean ?!

What's the phone model? delete any checksum file in the firmware folder
Reply
#16
I'm trying to use the infinix flashtool on Tecno h7. The phone is charging instead. What should I do?
Reply
#17
(03-06-2017, 09:18 AM)mike03 Wrote: I'm trying to use the infinix flashtool on Tecno h7. The phone is charging instead. What should I do?

Means you haven't installed vcom drivers
Refer to https://forum.hovatek.com/thread-440.html
Reply
#18
good morning pls i need help, my infinix hot 3 x554 had a low battery at night and i had to switch it off only to try to on it in the morning and it was not coming on, i thought it was due to the low battery, i charged it, at first it was showing battery charging but when i tried to on it, it went off and since then has refuse to come on, at a time it came on and stoped at the white background showing IUX and was like that for hours.... now its no longer coming on.... i have taken it to repairs but they don't seem to know the fault. i have downloaded the infinix flash tool, and the stock rom. but its not flashing because the tool can't discover it and my computer keep telling me that the device connected is not recognised...... please any solution?
Reply
#19
(06-29-2017, 08:52 AM)emperochris Wrote: good morning pls i need help, my infinix hot 3 x554 had a low battery at night and i had to switch it off only to try to on it in the morning and it was not coming on, i thought it was due to the low battery, i charged it, at first it was showing battery charging but when i tried to on it, it went off and since then has refuse to come on, at a time it came on and stoped at the white background showing IUX and was like that for hours.... now its no longer coming on.... i have taken it to repairs but they don't seem to know the fault. i have downloaded the infinix flash tool, and the stock rom. but its not flashing because the tool can't discover it and my computer keep telling me that the device connected is not recognised...... please any solution?

Please, create a new thread so we focus on it
see https://forum.hovatek.com/thread-514.html for how to create a thread
Reply










Users browsing this thread:
1 Guest(s)