Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

No Space error while flashing dead tecno m7

#21

(12-14-2014, 02:16 PM)hovatek Wrote:
(12-14-2014, 01:10 AM)jeffbanks56 Wrote: After it started the readback process... Wen the purple bar got to one 1%

retry, but this time around, connect the phone without battery while holding the volume increase button
No response


Reply
#22
(12-14-2014, 09:51 PM)jeffbanks56 Wrote: No response

you might need to try another M7 backup. do you get this same error with other versions of SP flash tool?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#23
(12-15-2014, 09:17 AM)hovatek Wrote:
(12-14-2014, 09:51 PM)jeffbanks56 Wrote: No response

you might need to try another M7 backup. do you get this same error with other versions of SP flash tool?
I don't have another version of SP Flash Tool
Reply
#24
(12-15-2014, 10:34 AM)jeffbanks56 Wrote: I don't have another version of SP Flash Tool

try version 5
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#25
(12-15-2014, 12:48 PM)hovatek Wrote:
(12-15-2014, 10:34 AM)jeffbanks56 Wrote: I don't have another version of SP Flash Tool

try version 5

I'm using v5.1343
Reply
#26
(12-15-2014, 11:54 PM)jeffbanks56 Wrote: I'm using v5.1343

try version 3. if same thing then you'll need to get access to a working m7 to backup
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#27
(12-16-2014, 12:56 AM)hovatek Wrote:
(12-15-2014, 11:54 PM)jeffbanks56 Wrote: I'm using v5.1343

try version 3. if same thing then you'll need to get access to a working m7 to backup
I've downloaded the v3, I was able to create the readback file. Since the phone can't come on, how do I process the readback file with MTKDroid tools please
Reply
#28
(12-16-2014, 02:39 AM)jeffbanks56 Wrote: I've downloaded the v3, I was able to create the readback file. Since the phone can't come on, how do I process the readback file with MTKDroid tools please

This is explained in the tutorial but you'll need a working M7 that can be recognized by MTK droid tools for that option to be clickable. you could try using any Tecno phone around you.
Another alternative is to use the first method (backing up a single file) in the tutorial to backup each file one at a time. this might be a little tedious but its your best bet for making a full ROM dump since you dont have a working phone of the same model around .

lets know which you decide
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#29
(12-16-2014, 09:45 AM)hovatek Wrote:
(12-16-2014, 02:39 AM)jeffbanks56 Wrote: I've downloaded the v3, I was able to create the readback file. Since the phone can't come on, how do I process the readback file with MTKDroid tools please

This is explained in the tutorial but you'll need a working M7 that can be recognized by MTK droid tools for that option to be clickable. you could try using any Tecno phone around you.
Another alternative is to use the first method (backing up a single file) in the tutorial to backup each file one at a time. this might be a little tedious but its your best bet for making a full ROM dump since you dont have a working phone of the same model around .

lets know which you decide

I've tried Tecno P5, it didn't work
Reply
#30
(12-16-2014, 11:39 PM)jeffbanks56 Wrote: I've tried Tecno P5, it didn't work

you'll have to read back / dump one file at a time then. let's know when that's done
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)