Hello There, Guest! Login Register


Free Hovatek T-shirts: Find out your Hovatek T-shirt size today! (May 05, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
alcatel ot idol 6030x s4clone stock rom
#1

hi I have my alcatel ot Idol 6030x and it's dead no sign of life except for the deep blue light on the upper left part when i connect to pc. I used SP FLASH TOOL V3.1244.0.sn85 and download the s4clone stock rom. i format it first(except bootloader) green circle pop up "OK". then i Download first the preloader.bin and got this: BROM ERROR: S_DA_SDMMC_WRITE_FAILED(3149)

then I use SP FLASH TOOL V5.13.52. format it first(except bootloader)and I have this: BROM ERROR: S_PART_NO_VALID_TABLE(1037). then download preloader.bin still same error. BROM ERROR: S_DA_SDMMC_WRITE_FAILED(3149)


my device manager doesnt show "DA VCOM PORT", only "mtk usb port". but when i run flash tool, before it shows error, "mtk usb port" loose connection and replace by "DA VCOM PORT" for 1-5 seconds loose on the device manager I say it because it appears on the lower right part of the sp flashtool. hope you can help me.




Attached Files
.jpg   flash tool error.jpg (Size: 152.43 KB / Downloads: 2)
Reply
#2
(12-11-2014, 06:40 AM)jorizpac Wrote: hi I have my alcatel ot Idol 6030x and it's dead no sign of life except for the deep blue light on the upper left part when i connect to pc. I used SP FLASH TOOL V3.1244.0.sn85 and download the s4clone stock rom. i format it first(except bootloader) green circle pop up "OK". then i Download first the preloader.bin and got this: BROM ERROR: S_DA_SDMMC_WRITE_FAILED(3149)

then I use SP FLASH TOOL V5.13.52. format it first(except bootloader)and I have this: BROM ERROR: S_PART_NO_VALID_TABLE(1037). then download preloader.bin still same error. BROM ERROR: S_DA_SDMMC_WRITE_FAILED(3149)


my device manager doesnt show "DA VCOM PORT", only "mtk usb port". but when i run flash tool, before it shows error, "mtk usb port" loose connection and replace by "DA VCOM PORT" for 1-5 seconds loose on the device manager I say it because it appears on the lower right part of the sp flashtool. hope you can help me.

do you have the stock rom for your exact phone model?
Reply
#3
(12-11-2014, 08:59 AM)hovatek Wrote:
(12-11-2014, 06:40 AM)jorizpac Wrote: hi I have my alcatel ot Idol 6030x and it's dead no sign of life except for the deep blue light on the upper left part when i connect to pc. I used SP FLASH TOOL V3.1244.0.sn85 and download the s4clone stock rom. i format it first(except bootloader) green circle pop up "OK". then i Download first the preloader.bin and got this: BROM ERROR: S_DA_SDMMC_WRITE_FAILED(3149)

then I use SP FLASH TOOL V5.13.52. format it first(except bootloader)and I have this: BROM ERROR: S_PART_NO_VALID_TABLE(1037). then download preloader.bin still same error.  BROM ERROR: S_DA_SDMMC_WRITE_FAILED(3149)


my device manager doesnt show "DA VCOM PORT", only "mtk usb port". but when i run flash tool, before it shows error, "mtk usb port" loose connection and replace by "DA VCOM PORT" for 1-5 seconds loose on the device manager I say it because it appears on the lower right part of the sp flashtool. hope you can help me.

do you have the stock rom for your exact phone model?

no, cant find on the net , thats why I use this rom coz my phone meet its requirements
Reply
#4
(12-11-2014, 10:02 AM)jorizpac Wrote:
(12-11-2014, 08:59 AM)hovatek Wrote:
(12-11-2014, 06:40 AM)jorizpac Wrote: hi I have my alcatel ot Idol 6030x and it's dead no sign of life except for the deep blue light on the upper left part when i connect to pc. I used SP FLASH TOOL V3.1244.0.sn85 and download the s4clone stock rom. i format it first(except bootloader) green circle pop up "OK". then i Download first the preloader.bin and got this: BROM ERROR: S_DA_SDMMC_WRITE_FAILED(3149)

then I use SP FLASH TOOL V5.13.52. format it first(except bootloader)and I have this: BROM ERROR: S_PART_NO_VALID_TABLE(1037). then download preloader.bin still same error.  BROM ERROR: S_DA_SDMMC_WRITE_FAILED(3149)


my device manager doesnt show "DA VCOM PORT", only "mtk usb port". but when i run flash tool, before it shows error, "mtk usb port" loose connection and replace by "DA VCOM PORT" for 1-5 seconds loose on the device manager I say it because it appears on the lower right part of the sp flashtool. hope you can help me.

do you have the stock rom for your exact phone model?

no, cant find on the net , thats why I use this rom coz my phone meet its requirements

hi i tried something else here, i used flashtool v4.0 and format(except bootloader) "OK". then instead of download, I ticked firmware upgrade, seemed going to be successful but after about 50% of blue line i got error brom error: s_ft_readback_fail(4009)

then I repeat the process i did (format->firmware upgrade)
and I got diff. error: sp flashtool error(8303)and it created a folder named "Back up Nvram"containing "bin region.img"

I will attach the screenshot, ,


Attached Files
.jpg   readback fail 4009.jpg (Size: 218.46 KB / Downloads: 2)
.jpg   error 8303.jpg (Size: 217.2 KB / Downloads: 3)
Reply
#5
(This post was last modified:12-11-2014, 10:30 AM by hovatek. )
(12-11-2014, 10:17 AM)jorizpac Wrote: hi i tried something else here, i used flashtool v4.0 and format(except bootloader) "OK". then instead of download, I ticked firmware upgrade, seemed going to be successful but after about 50% of blue line i got error brom error: s_ft_readback_fail(4009)
then I repeat the process i did (format->firmware upgrade)
and I got diff. error: sp flashtool error(8303)and it created a folder named "Back up Nvram"containing "bin region.img"
I will attach the screenshot, ,
First off, its a terrible idea flashing files not meant for your exact phone model to your phone, even if they have similar specs. you might want to search harder for your phone's stock ROM else, everything you're doing now might just be nailing its coffin
Reply
#6
(12-11-2014, 10:26 AM)hovatek Wrote:
(12-11-2014, 10:17 AM)jorizpac Wrote: hi i tried something else here, i used flashtool v4.0 and format(except bootloader) "OK". then instead of download, I ticked firmware upgrade, seemed going to be successful but after about 50% of blue line i got error brom error: s_ft_readback_fail(4009)
then I repeat the process i did (format->firmware upgrade)
and I got diff. error: sp flashtool error(8303)and it created a folder named "Back up Nvram"containing "bin region.img"
I will attach the screenshot, ,
First off, its a terrible idea flashing files not meant for your exact phone model to your phone, even if they have similar specs. you might want to search harder for your phone's stock ROM else, everything you're doing now might just be nailing its coffin

ok, ,thanks man,
Reply









Users browsing this thread:
1 Guest(s)