Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] infinix Zero No sim detected and Partition table

#21

(06-24-2016, 09:04 PM)hovatek Wrote:
(06-23-2016, 11:46 AM)VICTOROLA Wrote: Morning. Thanks so far.
I recharged the battery, and two re flashed the Rom I downloaded. it now comes on, but gets a boot loop on the Infinix logo. I tired to enter in to the recovery mode using the power and volume key combination, but it did not respond... Maybe because it's not rooted. Also, the phone would not power off no matter how long I press the power button during the boot loop. The screen respond with the battery charging loop also continues as soon as i plug it in.
thanks in advance

boot the phone using the power button then hold down the volume up button once it boots. allow the phone to continue its bootloop but don't release the button. the phone should eventually enter recovery mode. If it doesn't, use volume down instead. If the phone enters factory mode then wipe emmc


Thanks. I tried it extensively with both the volume up and down button during the boot loop. It just continued. I then tried power button and both the up and down button together, it then stayed off. As soon as i leave it, the loop continues... Do I have any other option?

Sent from my Infinix-X552 using Hovatek mobile


Reply
#22
(06-25-2016, 01:43 PM)VICTOROLA Wrote: Thanks. I tried it extensively with both the volume up and down button during the boot loop. It just continued. I then tried power button and both the up and down button together, it then stayed off. As soon as i leave it, the loop continues... Do I have any other option?

Sent from my Infinix-X552 using Hovatek mobile

lets review the firmware.
whats the exact filename of the firmware you flashed?
Reply
#23
(06-26-2016, 10:49 AM)hovatek Wrote:
(06-25-2016, 01:43 PM)VICTOROLA Wrote: Thanks. I tried it extensively with both the volume up and down button during the boot loop. It just continued. I then tried power button and both the up and down button together, it then stayed off. As soon as i leave it, the loop continues... Do I have any other option?

Sent from my Infinix-X552 using Hovatek mobile

lets review the firmware.
whats the exact filename of the firmware you flashed?


I flashed one that I downloaded from hovatek named (Hovatek)- Infinix-X506-J609-16gb

Sent from my Infinix-X552 using Hovatek mobile
Reply
#24
(06-26-2016, 05:44 PM)VICTOROLA Wrote: I flashed one that I downloaded from hovatek named (Hovatek)- Infinix-X506-J609-16gb

Sent from my Infinix-X552 using Hovatek mobile

have you tried flashing the 16GB J608 firmware?
Reply
#25
(06-27-2016, 12:32 PM)hovatek Wrote:
(06-26-2016, 05:44 PM)VICTOROLA Wrote: I flashed one that I downloaded from hovatek named (Hovatek)- Infinix-X506-J609-16gb

Sent from my Infinix-X552 using Hovatek mobile

have you tried flashing the 16GB J608 firmware?

No sir.
Kindly help with a J608 firmware download link.

Sent from my Infinix-X552 using Hovatek mobile
Reply
#26
(06-27-2016, 01:09 PM)VICTOROLA Wrote: No sir.
Kindly help with a J608 firmware download link.

Sent from my Infinix-X552 using Hovatek mobile

its @ https://forum.hovatek.com/thread-533.html
Reply
#27
(06-28-2016, 09:14 AM)hovatek Wrote:
(06-27-2016, 01:09 PM)VICTOROLA Wrote: No sir.
Kindly help with a J608 firmware download link.

Sent from my Infinix-X552 using Hovatek mobile

its @ https://forum.hovatek.com/thread-533.html

Evening. I downloaded J608 variant and tried to flash it but it did not go through. The error is attached to this post.

Attached Files
.jpg   IMG_20160629_182829_040.jpg (Size: 395.77 KB / Downloads: 2)
Reply
#28
(06-29-2016, 06:30 PM)VICTOROLA Wrote: Evening. I downloaded J608 variant and tried to flash it but it did not go through. The error is attached to this post.

yours is J609 then.
reflash the J609 using firmware upgrade before we proceed with the next fix
waiting.....
Reply
#29
(06-30-2016, 08:17 PM)hovatek Wrote:
(06-29-2016, 06:30 PM)VICTOROLA Wrote: Evening. I downloaded J608 variant and tried to flash it but it did not go through. The error is attached to this post.

yours is J609 then.
reflash the J609 using firmware upgrade before we proceed with the next fix
waiting.....

Morning. Sorry for the delay. Sir, don't ready know the state if the phone now. I tried flashing it with the J609 that I originally downloaded and confirmed working before the initial crash. Now it stays a lot longer in red bar for DOWNLOADING DA... It spends like 100 seconds and then gives an error.
It's now showing MTK USB PORT (COM8) In device manager instead of something like vcom or something like that. Any hope?

Sent from my Infinix-X552 using Hovatek mobile
Reply
#30
(07-07-2016, 07:28 AM)VICTOROLA Wrote: Morning. Sorry for the delay. Sir, don't ready know the state if the phone now. I tried flashing it with the J609 that I originally downloaded and confirmed working before the initial crash. Now it stays a lot longer in red bar for DOWNLOADING DA... It spends like 100 seconds and then gives an error.
It's now showing MTK USB PORT (COM8) In device manager instead of something like vcom or something like that. Any hope?

Sent from my Infinix-X552 using Hovatek mobile

reinstalling the driver should help with that
Reply










Users browsing this thread:
1 Guest(s)