Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] please help me on how to change an innjoo halo imei number

#1
Lightbulb 

admin, please help me on how to change my innjoo halo imei number, it is already rooted.


Reply
#2
(10-24-2015, 06:11 AM)muhammed4u Wrote: admin, please help me on how to change my innjoo halo imei number, it is already rooted.

* Download and Install Mobile Uncle then grant superuser permission
* Select Engineer mode
* Select Engineer mode (MTK)
* Navigate to the Connectivity tab
* Select CDS information
* Select Radio Information

At Phone 1: Insert the command below then click Send at command
Code:
AT+EGMR=1,7,"IMEI1"

At Phone 2: Insert the command below then click Send at command
Code:
AT+EGMR=1,10,"IMEI2"

* If you get an error like "This command is not allowed in user build" then leave a space between AT+ and EGMR as show below

Code:
AT+ EGMR=The rest of the code
Reply
#3
(10-24-2015, 04:01 PM)X3non Wrote:
(10-24-2015, 06:11 AM)muhammed4u Wrote: admin, please help me on how to change my innjoo halo imei number, it is already rooted.

* Download and Install Mobile Uncle  then grant superuser permission
* Select Engineer mode
* Select Engineer mode (MTK)
* Navigate to the Connectivity tab
* Select CDS information
* Select Radio Information

At Phone 1: Insert the command below then click Send at command
Code:
AT+EGMR=1,7,"IMEI1"

At Phone 2: Insert the command below then click Send at command
Code:
AT+EGMR=1,10,"IMEI2"

* If you get an error like "This command is not allowed in user build" then leave a space between AT+ and EGMR as show below

Code:
AT+ EGMR=The rest of the code
thanks very much, i appreciate u. But i hv tried this step doesnt work. when selecting "engineerig mode" it toast me with this "engineering mode is not avalable". even i tried mtk engineerig application too.
Reply
#4
(10-25-2015, 09:14 AM)muhammed4u Wrote:
(10-24-2015, 04:01 PM)X3non Wrote:
(10-24-2015, 06:11 AM)muhammed4u Wrote: admin, please help me on how to change my innjoo halo imei number, it is already rooted.

* Download and Install Mobile Uncle  then grant superuser permission
* Select Engineer mode
* Select Engineer mode (MTK)
* Navigate to the Connectivity tab
* Select CDS information
* Select Radio Information

At Phone 1: Insert the command below then click Send at command
Code:
AT+EGMR=1,7,"IMEI1"

At Phone 2: Insert the command below then click Send at command
Code:
AT+EGMR=1,10,"IMEI2"

* If you get an error like "This command is not allowed in user build" then leave a space between AT+ and EGMR as show below

Code:
AT+ EGMR=The rest of the code
thanks very much, i appreciate u. But i hv tried this step doesnt work. when selecting "engineerig mode" it toast me with this "engineering mode is not avalable". even i tried mtk engineerig application too.


Waste your time not.
The fone ain't mtk....it's spreadtrum
Reply
#5
(10-25-2015, 10:02 AM)Omegaohms Wrote:
(10-25-2015, 09:14 AM)muhammed4u Wrote:
(10-24-2015, 04:01 PM)X3non Wrote:
(10-24-2015, 06:11 AM)muhammed4u Wrote: admin, please help me on how to change my innjoo halo imei number, it is already rooted.

* Download and Install Mobile Uncle  then grant superuser permission
* Select Engineer mode
* Select Engineer mode (MTK)
* Navigate to the Connectivity tab
* Select CDS information
* Select Radio Information

At Phone 1: Insert the command below then click Send at command
Code:
AT+EGMR=1,7,"IMEI1"

At Phone 2: Insert the command below then click Send at command
Code:
AT+EGMR=1,10,"IMEI2"

* If you get an error like "This command is not allowed in user build" then leave a space between AT+ and EGMR as show below

Code:
AT+ EGMR=The rest of the code
thanks very much, i appreciate u. But i hv tried this step doesnt work. when selecting "engineerig mode" it toast me with this "engineering mode is not avalable". even i tried mtk engineerig application too.


Waste your time not.
The fone ain't mtk....it's spreadtrum
so spreadtrum cannot change imei no? Shy

Reply
#6
(10-25-2015, 12:34 PM)muhammed4u Wrote: so spreadtrum cannot change imei no? Shy

sorry thought the phone was mtk based
since its spreadtrum, follow the guide @ https://forum.hovatek.com/thread-664.html
Reply
#7
i have tried the above three methods, it doesn't work oooo. on the rooted phhone procedure, when i get to the page i suppose to see "set IMEI" on the last page, i will see "PLSensor enabled". Also, on the system, the driver did not install and i search for the latest one on google and i install it, still the application did not detect the phone. Please help am in need of this very well. thanks
Reply
#8
Use the mauimeta

Sent from my itel it1451 using Hovatek mobile
Reply
#9
How to upgrade innjoo halo to lollipop

Sent from my Halo using Hovatek mobile
Reply
#10
(05-13-2016, 12:36 PM)zebat Wrote: How to upgrade innjoo halo to lollipop

Sent from my Halo using Hovatek mobile

already replied @ https://forum.hovatek.com/thread-13053.html
Reply










Users browsing this thread:
1 Guest(s)