Bricked E5573cs-322, LED Lights blinking

4

26-10-2019, 05:50 PM

#1

Hello,
I followed the tutorial at https://www.hovatek.com/forum/thread-26818.html since the mifi uses a software version 21.327.x, and I downloaded the firmware listed for my software version: E5573Cs-322 - v21.327.62.00.200 unlock without dismantling.
I put the device in download mode and then run the exe file. I get this:

No RNDIS appeared for more than 30mins and both lights keep blinking after reboot.
Device not seen in DCUnlocker.
I am able to bootshot fine, it also shows the Application Interface and PCUI Interface in device manager
Is there any solution for this.

droidmobitech
Senior Member

828

26-10-2019, 06:26 PM

#2

(26-10-2019, 05:50 PM)curlyjoe Hello,
I followed the tutorial at https://www.hovatek.com/forum/thread-26818.html since the mifi uses a software version 21.327.x, and I downloaded the firmware listed for my software version: E5573Cs-322 - v21.327.62.00.200 unlock without dismantling.
I put the device in download mode and then run the exe file. I get this:

No RNDIS appeared for more than 30mins and both lights keep blinking after reboot.
Device not seen in DCUnlocker.
I am able to bootshot fine, it also shows the Application Interface and PCUI Interface in device manager
Is there any solution for this.

I assume device has no secureboot with qfuse enabled

If you are familiar with usbloader via boot shot

Recover device using usbloader method

Sent from my SM-N920C using Tapatalk

curlyjoe
Newbie

4

27-10-2019, 02:20 AM

#3

Thank you. Do you have any particular usbloader bin, I can use. All the ones I used while boot shorting did not work. The flashing goes too fast almost 1 second.

Perhaps you can link me to a loader file for the particular software version

curlyjoe
Newbie

4

27-10-2019, 10:20 PM

#4

(26-10-2019, 06:26 PM)droidmobitech
(26-10-2019, 05:50 PM)curlyjoe Hello,
I followed the tutorial at https://www.hovatek.com/forum/thread-26818.html since the mifi uses a software version 21.327.x, and I downloaded the firmware listed for my software version: E5573Cs-322 - v21.327.62.00.200 unlock without dismantling.
I put the device in download mode and then run the exe file. I get this:

No RNDIS appeared for more than 30mins and both lights keep blinking after reboot.
Device not seen in DCUnlocker.
I am able to bootshot fine, it also shows the Application Interface and PCUI Interface in device manager
Is there any solution for this.
I assume device has no secureboot with qfuse enabled

If you are familiar with usbloader via boot shot

Recover device using usbloader method

Sent from my SM-N920C using Tapatalk

Hi,

I have used balong usbloader, see image:

Still after restart, it still blinks. Can this be solved at all?

PS: I've got TeamViewer with a good Internet. Please help

This post was last modified: 27-10-2019, 10:29 PM by curlyjoe.

freshtyt
Senior Member

2,949

28-10-2019, 12:59 AM

#5

(27-10-2019, 10:20 PM)curlyjoe Hi,

I have used balong usbloader, see image:

Still after restart, it still blinks. Can this be solved at all?

PS: I've got TeamViewer with a good Internet. Please help

after this, is the device still detected in device manager as 3G PC UI port? or FC ***?
if FC *** then usbloader worked, look for and flash corresponding firmware and webui

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions