February Discount: 48% discount on Hovatek's online training which covers Mediatek Smartphones, Smartwatches, Feature phones & Tablets. ENROLL NOW (Feb, 2019)
06-05-2015, 04:53 PM
(06-05-2015, 03:59 PM)ahas627 Wrote: what is another option of this sir???
so sp flash tool completes the format , gives the OK pop up ; yet, the phone still comes on like nothing happened?
Need faster replies or urgent assistance?
Try our Private Support for a one-on-one session with a Hovatek Rep. UPGRADE NOW!
X
Thanks to hovatek |
06-05-2015, 05:17 PM
yes sir its complete all the format , flash, in sp flash tools , yupss the phone comes on like nothings happened, its always 4.1 jeleybean it hangs then res start automatically.. the system, any other idea sir?
X
Thanks to ahas627 |
06-05-2015, 05:28 PM
(06-05-2015, 05:17 PM)ahas627 Wrote: yes sir its complete all the format , flash, in sp flash tools , yupss the phone comes on like nothings happened, its always 4.1 jeleybean it hangs then res start automatically.. the system, any other idea sir?
thats another variant of emmc problems.
need you to give the fastboot another shot. AIO flasher just might come in handy.
another option is to sideload the stock ROM using ADB
Need faster replies or urgent assistance?
Try our Private Support for a one-on-one session with a Hovatek Rep. UPGRADE NOW!
X
Thanks to hovatek |
06-05-2015, 05:35 PM
need you to give the fastboot another shot. AIO flasher just might come in handy.
the problem this is there is no display of fastboot, as u said i will do in mtk droid the after the fastboot will display i do the aio flasher but it failed my cp shut down in doing this
(Downloaded AIO Flasher @ htt...1345123273 1b. Download adb and fastboot drivers @ htt...view?pli=1 then install 2. Launch adb terminal (via MTK droid tools ) 3. Boot the phone into either factory mode (volume decrease + power button) or boot mode 4. Connect the phone to PC 5. In adb terminal, type adb devices then press enter 6. Type adb reboot bootloader then press enter - sir i do the procedure until number (6) but my phone iss automatically off... - ) i cant proceed to aio flasher because my phone will not dsplayed the fastboot mode
another option is to sideload the stock ROM using ADB - how can i do this side load stock rom? using adb?
the problem this is there is no display of fastboot, as u said i will do in mtk droid the after the fastboot will display i do the aio flasher but it failed my cp shut down in doing this
(Downloaded AIO Flasher @ htt...1345123273 1b. Download adb and fastboot drivers @ htt...view?pli=1 then install 2. Launch adb terminal (via MTK droid tools ) 3. Boot the phone into either factory mode (volume decrease + power button) or boot mode 4. Connect the phone to PC 5. In adb terminal, type adb devices then press enter 6. Type adb reboot bootloader then press enter - sir i do the procedure until number (6) but my phone iss automatically off... - ) i cant proceed to aio flasher because my phone will not dsplayed the fastboot mode
another option is to sideload the stock ROM using ADB - how can i do this side load stock rom? using adb?
X
Thanks to ahas627 |
06-05-2015, 09:03 PM
(06-05-2015, 05:35 PM)ahas627 Wrote: need you to give the fastboot another shot. AIO flasher just might come in handy.
the problem this is there is no display of fastboot, as u said i will do in mtk droid the after the fastboot will display i do the aio flasher but it failed my cp shut down in doing this
(Downloaded AIO Flasher @ htt...1345123273 1b. Download adb and fastboot drivers @ htt...view?pli=1 then install 2. Launch adb terminal (via MTK droid tools ) 3. Boot the phone into either factory mode (volume decrease + power button) or boot mode 4. Connect the phone to PC 5. In adb terminal, type adb devices then press enter 6. Type adb reboot bootloader then press enter - sir i do the procedure until number (6) but my phone iss automatically off... - ) i cant proceed to aio flasher because my phone will not dsplayed the fastboot mode
another option is to sideload the stock ROM using ADB - how can i do this side load stock rom? using adb?
* Get the flashable zip you wish to use (lets assume its named hovatek.zip)
* Boot into recovery mode
* Connect phone to PC
* Launch adb on PC
* In recovery mode, put the phone in sideload mode
For TWRP, you can find it in the Advanced > ADB Sideload
For CWM, you can find it in the Install > Install Zip from Sideload
* Copy the flashable zip into the adb folder
* In adb, run the following commands
Code:
adb devices
adb sideload hovatek.zip
adb reboot
Need faster replies or urgent assistance?
Try our Private Support for a one-on-one session with a Hovatek Rep. UPGRADE NOW!
X
Thanks to hovatek |
06-06-2015, 02:17 AM
ok sir i will try it now
X
Thanks to ahas627 |
06-06-2015, 03:43 AM
sir there is a problem if i will put in the recovery mode (volume + and power) in the option of sideload , adb in mtk droid tools cannot detect my cp, but wen i press vol down n power my cp will detect in adb mode in mtk droid tools (chinese character displays) there is no option there in side load mode, i got a flashable file already.. if my cp did not detect in adb i cannot perform the command you gave it to me right?
X
Thanks to ahas627 |
06-06-2015, 03:47 AM
in recovery volume + and power , i can see the option of side load , when i click adb sideload , the command displayed - wipe dalvik cache and wipe cache when it finish loading in starting adb sideload features it hang up my phone ..
X
Thanks to ahas627 |
06-06-2015, 09:46 AM
(06-06-2015, 03:47 AM)ahas627 Wrote: in recovery volume + and power , i can see the option of side load , when i click adb sideload , the command displayed - wipe dalvik cache and wipe cache when it finish loading in starting adb sideload features it hang up my phone ..
if you have a flashable zip then try flashing it normally in recovery mode since you have TWRP. if that fails then we can look closer at sideloading
Need faster replies or urgent assistance?
Try our Private Support for a one-on-one session with a Hovatek Rep. UPGRADE NOW!
X
Thanks to hovatek |
06-06-2015, 01:24 PM
i do that already many times inrecovery ... its completed i thought it work perfect but when i open my phone ,, nothing change many errors n reboot automatically.. any other solution
X
Thanks to ahas627 |
« Next Oldest | Next Newest »
Users browsing this thread: 1 Guest(s)